Philips 40PFL3208H/12 flipped screen

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • loskonsitos
    New Member
    • Mar 2018
    • 3
    • poland
    #1

    Philips 40PFL3208H/12 flipped screen

    Hello! I have a 40PFL3208H/12 TV, week ago it stopped working and TCON board was a problem so i've exchanged it. Problem is that i put a TCON from 42PFL3108H/12 because i have it on stock.
    Now it's working but screen is inverted, upside down. I've read a lot of manuals, tried to fix it in service menu, changed all the option codes for the correct ones but it's still inverted and i'm stucked right now. I can't find which option could lead for the desired settings. Is it even possible to fix it in that way in this tv?

    Huuuuge request for help guys. If anyone knows anything that might solve the problem, please reply. Thanks
    Tags: None
    • ronelex
      Senior Member
      • Oct 2016
      • 195
      • Philippines
      #2
      Re: Philips 40PFL3208H/12 flipped screen

      I think you can try flashed the eeprom in the new tcon from the data from your old tcon? That is only an idea, I have never tested it goodluck

        Comment

        • loskonsitos
          New Member
          • Mar 2018
          • 3
          • poland
          #3
          Re: Philips 40PFL3208H/12 flipped screen

          Thanks, i think i should try that. I've tried to put 062598 + Menu + XXX code, but i've used wrong one (163) and now it's on showing backlight and no reaction to RC. Any idea how to turn it back to the last state? Tried to do software update but no reaction.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Ryan.man
              Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
              by Ryan.man
              Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

              My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

              This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
              02-04-2025, 12:23 PM
            • smic717394
              iphone XS turns off when press on screen.
              by smic717394
              Hi,

              I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
              07-25-2024, 10:16 AM
            • Chrissygizmo
              Samsung UE55JU6800K half screen dark
              by Chrissygizmo
              Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
              I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
              02-10-2025, 12:33 AM
            • spice_disc
              Vizio TV M50-C1 reboot cycle and static on screen
              by spice_disc
              I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

              The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
              1 Photo
              09-08-2024, 02:37 PM
            • ipatch
              ipad pro 9.7" blew a SMD component while replacing the screen 🤦‍♂️
              by ipatch
              i have an ipad pro 9.7" (1st gen) A1674 where i replaced the screen, but never attached the screen to the frame/chassis (glued down) due to the ipad being previously dropped so the new screen would never fit in the frame properly. so i need flex/bend the chassis to eventually fix the new screen in properly. so i temporarily just applied blue tape around the edges of the screen to keep it in place. when watching videos with the ipad the screen started flicker, so i though maybe the new quasi cheap amz screen i purchased was going out. so i disconnected then reconnected with power still on,...
              08-24-2024, 02:36 PM
            • Loading...
            • No more items.
            Working...