Samsung ue49mu6120

[lotas]

OK. I used same procedure for programming, verify was OK, so there is possible, that board has a different failure. But voltages are OK and there is no short at board.
Thank You very much for Your time. Martin

You can once again read this dump that you recorded and post it, I'll take a look.

[Martin_CZ]

OK, I programmed 25Q40 modifyed by You and tried to turn on TV. No reaction.
Then i read a dump (in attachment). Thanks. Martin

[lotas]

OK, I programmed 25Q40 modifyed by You and tried to turn on TV. No reaction.
Then i read a dump (in attachment). Thanks. Martin

Your dump is damaged again, which means you did something wrong with the status register.

[ostap-vip]

Hi, I have the same sympthoms with my TV. The TV does not turn on, but when I disconnect the motherboard from power supply, the backlihgt leds are on. I have read the dump. Can you help me too. TV :
SAMSUNG UE55MU6402UXXH
MOTHERBOARD MODEL: BN41-02568B
CHIP : WINDBON 25Q40CLSIP

[lotas]

Hi, I have the same sympthoms with my TV. The TV does not turn on, but when I disconnect the motherboard from power supply, the backlihgt leds are on. I have read the dump. Can you help me too. TV :
SAMSUNG UE55MU6402UXXH
MOTHERBOARD MODEL: BN41-02568B
CHIP : WINDBON 25Q40CLSIP

Try.

[ostap-vip]

Thank you,it is working !

[lotas]

Thank you,it is working !

Ok!