New Members - please post your introductions here

[Jonyjams Computers]

Re: New Members - please post your introductions here

Howdy Hey from Kansas City Missouri (Misery)...
I own "Jonyjams Computers" & "Jonyjams Studios" (recording studio) in Wellington Missouri.
We have a little over 150,000 machines spread out over the good ole USA (25 years), and have lost count on all the repairs done in my shop...
Yup, I'm older then dirt. Not sure you youngins know anything about the good ole Sinclairs or the "Lisa"?... (talkin late 60's and early 70's).
At any rate, I rear from that world and later studied Plastic Technology and was fortunate enough to be on the ground floor as an engineer to help Kraft foods Inc convert glass over to plastic. Later designed & engineered 2 very successful Continuous Extrusion and Micro-processing plants in Illinois and Missouri respectively. (what a cut throat industry)...
Food for thought... "It doesn't take a good machine operator to make a good machine run, It takes a good machine operator to make a bad machine run"... at any rate...

Through a google search looking for parts is how I found "Badcaps".
Surfing through the site reveals a ton of Knowledge and help...
Glad I found the place...

jd

[Feet]

Introduction

Hi,

I found this forum while searching for a solution for my defective TV.

Coming from Bavaria, Germany - known for the beer and the Oktoberfest.

Greetings,
Frank

[lipcalho]

Re: New Members - please post your introductions here

Obrigado, sou novo no forum, estou em um nível intermediário na eletrônica, gosto de conserto de notebooks e celulares, e me aventuro em radios e tv's de vez em quando, espero adquirir mais conhecimento com este forum e passar algo pra quem precise de ajuda!
Não há nada que um iniciante não possa ensinar ou que um veterano não possa aprender!

[skunker]

Re: New Members - please post your introductions here

Hey guys...

I am looking for way to bypass BIOS-Password of my old Dell D630 Notebook and google lead me to this forum.

I am 36 years ols and working as a software-developer in a small company in Saxony.

Greetings from Germany

[JenneDezaeger]

Re: New Members - please post your introductions here

Hi,

I'm an embedded systems engineer that started a company in electronics repairs in the B2B scene quite a while ago. Lately I've been repairing more and more consumer devices so being part of Badcaps where a lot of knowledge and information is available is a plus.

Greetings Jenne

[MacBryan]

Re: New Members - please post your introductions here

Hello from germany,

looking for some parts, fun and knowledge

[valerioalex]

buenas noches

hola amigos como estan todos soy nuevo y espero resivir y ayudar en lo que pueda. gracias.

[asus1990]

Re: New Members - please post your introductions here

Hello,

I am Ricky, i am an IT technician and i like fixing all kind of stuff, from kids toys to laptops/PCs.
Looking forward to learn more about electronics.

Cheers

[syndromo_downs]

Re: New Members - please post your introductions here

Howdy.

My name is Jason. I am a Diesel Tech full-time. Because of the cold weather, I prefer to work on TV's in the house. I flip TVs and cars. I found this site because of a typical Vizio issue with the mainboards. Also because of this site, I ventured beyond my comfort zone of soldering and I'm looking forward to expanding on it.

[Jonny1974]

Re: New Members - please post your introductions here

Hi guys and girls. I'm a new member. Just reading some of these posts make me realise that I'm so much a beginner it hurts.. Well not a new starter as such but a variety tech. I got 20 plus years on industrial fault finding I. E. Anything electrical used to make anything electrical. Got a 'bit' of knowhow on multiple makes of Cnc controllers, plcs, basically anything that needs fixing yesterday! Usually under emense pressure to get things running again. I'm 40 something, with a bald spot at the back of my head that is quickly having a meeting with my forehead. I'm here for info but I am liking the tone of these posts. Who said techs can't be comedians?? Nice to be here. 😜

[AndyTech]

Re: New Members - please post your introductions here

Hello

so finally i have joined this great forum , been here many times and found solutions for many problems related to motherboard repair , thank you for all info i have already got from this forum and thank you for letting me be a part of ths great Comunity.

Andy - 49 - auto tech(25 years) - moderboard fixing hobby last 10 years - location United Kingdom

cheers
Cheers.

[Ghgh22]

Re: New Members - please post your introductions here

Hello, I'm new to this and I am going to make a thread about fixing the backlights on my Polaroid TV.

[lylon]

Re: New Members - please post your introductions here

Hello I'm searching information about macbook repair.

[Gabr]

Re: New Members - please post your introductions here

Hello All, my name is Gabor.
I've been in computers and electronics repairs since 1987. But only recently started with 'micro soldering' Happy to join this forum and learn..

[Psychedelic]

Re: New Members - please post your introductions here

Hi guys,
My name is Rocky. I work on computers and own a computer shop. I stumbled on this site because I want to get into learning how to fix electronics as well. For example I am looking to replace some caps in one my power supplies. Other than that I am a single parent to a 17 year old son. I enjoy hunting and fishing with my son. We also work on cars. I look forward to meeting new people, and having interesting conversations plus learning new things!

[Jjhole]

Re: New Members - please post your introductions here

Hi hello from Finland.

Started with ZX Spectrum , working as electrician 30 years and now full time ITC as system specialist.

Regards Jaska

[JOHNARD]

Re: New Members - please post your introductions here

happy i was able to get reg here., i hope i am welcome., thank you admin and all members.,

[sysaputra]

Re: New Members - please post your introductions here

Hello all, iam Saputra from indonesia. Iam IT technician, repairing and reflash laptop bioses is what iam doing right now. So i found this great community from googling how to clear hp bios password.
This place is really super great forum, i love to be here. Iam a knowledge seeker btw hehe

[Ikkepop]

Re: New Members - please post your introductions here

Hey, Alex from Lithuania here. Came here looking for some info on repairing a samsung syncmaster lcd monitor. I am also an electronics hobbyist and a software engineer.

[vipermsq]

Re: New Members - please post your introductions here

hello
My name is Mauricio Saldarriaga an Electronical Engineer very curious with laptops and all reverse enginering. i joined you forum because i want to learn a lot about bios and laptops mods