New Members - please post your introductions here

[jcb]

Re: New Members - please post your introductions here

Picked up a few 2007FPs that need some fixin'. Should make for good auxiliary monitors in portrait mode to accompany my ZR30w!

[obs_cy]

Re: New Members - please post your introductions here

hello,

soldering iron is smoking!

[Toddyposs]

Re: New Members - please post your introductions here

Hello. I'm a newb when it comes to tvs but I've been taking a lot of them in and I want to learn a bit how they work and how to fix them. I have an auto mechanics background so I can assemble and disassemble things easy.

[Raheel]

Re: New Members - please post your introductions here

hello to every one and happy new year

Best wishes to all members of this blog

[cnes]

Re: New Members - please post your introductions here

new member, i have a samsung 245t. i think my caps just blew, hopefully i can find the help here. thanks

[rsrace]

Re: New Members - please post your introductions here

Required Intro to post:
I am an electronics (they called it computer hardware back then) engineer by training but that was a long time ago when dinosaurs still roamed the earth and the Intel 8086 was THE chip of choice, bit/slice microprocessor design was seen as the future, and no one needed more than 1k of ram. Now I pretty much stick to fixing stuff around the house and a lot of audio/amplifier/guitar modifications. I found this forum searching for answers and schematics for a flat screen television that I am trying to revive and am amazed at all the info on the site - a new favorite for sure.
Randy

[Rpedrosat]

Re: New Members - please post your introductions here

Hello forum.

I stumbled with this forum, when I was looking for a bios dump on Internet, and I do not regret I've found it.
I hope to learn a lot and also teach a little.
I would like to wish you all a Happy New 2016 Year !!

[marcopolo123]

Re: New Members - please post your introductions here

Wow, what a great community! Glad to be a "junior" part My name is Mark and I am a computer tech in Minneapolis, MN. Hope to be able to contribute something to the forums!

[AshC1023]

Re: New Members - please post your introductions here

Hi, we're new here and this is our mandatory post to be able to post a thread. I've already done a search on our model number and can't find anything on it specifically, only another model which looks completely different on the inside.
Thanks.

[jamcnabb]

Re: New Members - please post your introductions here

Hi - Just joined trying to figure out how to repair a television. Already tried one possibility without success so I will be posting once the formalities are out of the way. My name is Andy - thanks.

[tattoodee]

Re: New Members - please post your introductions here

Hi all, I'm a tattooist from Manchester who until recently had no interest in capacitors etc but became fed up with replacing electrical items so decided to learn a little about what can be done to repair them, I soon realised what a lot there is to learn so please be prepared for what may seem to you to be stupid questions

[tattoodee]

Re: New Members - please post your introductions here

Hi all, I'm a tattooist from Manchester who until recently had no interest in capacitors etc but became fed up with replacing electrical items so decided to learn a little about what can be done to repair them, I soon realised what a lot there is to learn so please be prepared for what may seem to you to be stupid questions

Sorry should have said Manchester UK

[selfull]

Re: New Members - please post your introductions here

Hi folks! I'm Sel Full, a long time DIY'er with extraordinary MacGyver skills. I'm also a 15 year IT professional, troubleshooting and repairing various and sundry hardware and software problems. I like what I do, and I appreciate the techs out there who are open to share knowledge. I'm just another one in the mix...

[leogenic]

Re: New Members - please post your introductions here

Hi... Happy New Year to all... 😃

[navaidstech]

Re: New Members - please post your introductions here

Hi Everyone....

Joined the site a few hours ago. Been into electronics for 30+ years, started out as a curious 12 year old and then it progressed into a career. Currently working on air navigation and communication systems at a major airport in Canada. Also holding a ham radio license...another hobby I've been at for quite some time now.
Good to meet you all!

[Ooodavie]

Re: New Members - please post your introductions here

New guy here from Illinois. Just trying to get some help with my tv, and this looks like the place to be!

[wmansir]

Re: New Members - please post your introductions here

Hi, Y'all.

I fixed my LCD a few years ago just from lurking here in the forums. Now it's given up the ghost again and I'm looking for some more help.

[airforce]

Re: New Members - please post your introductions here

I replaced a capacitor 35v 68uf the fan goes on but no lights on digital display and the buttons don't work. could i have sorted out all others? jenn air wall oven

[BushTech]

Re: New Members - please post your introductions here

Hello everyone, newbie. Have a good amount of electronics and troubleshooting experience but since I don't do tv repairs anymore sometimes i need some re orientation.

[Imago]

Re: New Members - please post your introductions here

Happy New Year to all!

My first post here... from Saskatchewan, Canada. My main hobby is vintage tube type hi-fi gear from the 50's and 60's, but I'll tackle almost any electronic challenge! Also into early Honda CB750K's.