New Members - please post your introductions here

[dukax]

Re: New Members - please post your introductions here

Hi there, just hoping to fix my Asus N61JV.

[Gigs]

Re: New Members - please post your introductions here

Good morning from a sunny civil unrest filled South Africa haha.
My name is Gian, i am in the pro audio repair market, i only have life-school electronic understanding but do tend to get some stuff done/repaired.
I work in a privately owned music shop, mainly doing repairs that range from making up HQ audio cables to restringing guitars. I do need help sometimes with things and feel that this forum would be a great asset to my knowledge and work.

Have a pleasant day.

[radiogeek]

Re: New Members - please post your introductions here

New guy here, Just trying to repair a monitor with failed CCFL's with new LED strips. need some help with wiring the LEDs.

[cornie]

Re: New Members - please post your introductions here

Cheers, My name's Konrad, I'm a sound engineer and changed many bad caps in my life but i found this great forum while trying to fix my CCFL display's transformer buzz and can't figure it out that's why i need some specialist's insight

[bigbily09]

Re: New Members - please post your introductions here

hi. im new in here
need a acer v3 112p bios file

[guille2525]

Re: New Members - please post your introductions here

Hello, my name's Guillermo, I like the information about capacitor

[tomekrudy]

Re: New Members - please post your introductions here

Hi there ,

[novcze]

Re: New Members - please post your introductions here

Hi,

found this forum when searching for a service manual for Samsung TV power supply

[PatD]

Re: New Members - please post your introductions here

New to Forum 10-14-2016... brief intro.
I am a recently retired public school district technology department supervisor, and was originally an electronics teacher. (...retired after a 40 year career in public education)
Nevermind DOS, Windows, etc.; when I went to college, we keypunched our programs onto cards, handed the deck of cards into the computer center, and came back a couple of days later to get our printout for the inevitable task of reviewing it for programming errors! So, I've seen and worked with it all, at one point being the school district's "Palm Education Training Coordinator" in the very early "PDA", pre-smartphone days.
So, hello to all here!
PatD

[Johncstone]

Re: New Members - please post your introductions here

I'm an electrical engineer (FSU) who has been an electronic tinkerer since early junior high. My job in power plant and transportation simulation has enabled me to pursue my electronic design desires.
I am close to retirement, which I hope means I will have plenty of time to peruse this web site.

[mycompufix]

Re: New Members - please post your introductions here

hello there, and this is Riko From longview, TX trying to learn more about TV repairs, however at this point i feel i need more input. there are some TV's i just can't figure out the second steps. that's why i am here. i am the owner of a computer repair service CompuFix, laptops, Macbooks, tablets, and now im expanding to TV's. thank you so much!

[dmkc1207]

Re: New Members - please post your introductions here

Hello gang, I'm Dave from NY..my Viewsonic tv is on the fritz and being raised by parents who talk about the Great Depression and coming from a family of 6 kids we were never one to waste anything..I'm an oldtimer, Social Security age and a retired phone company field tech..I'm no electronics whiz by a long stretch but am pretty geeky, can fumble my way thru a volt/ohm meter and simple schematics so I thought I'd try and see if this is a "simple" fix as I hate the new "throw-away" world..see you @ the board!

[zaldy9253]

Re: New Members - please post your introductions here

Hi everyone, I'm an electronic technician and work in an amusement company for about 10 yrs now.

[Jsikora]

Re: New Members - please post your introductions here

Hello my name is Jamie. I have been working on electronics for 22 years. I started at the age of 14 at my Uncle's computer store in Santa Cruz, CA. Since then I worked at Radio Shack for 8 years, and now have my own thing going parting out broken screen TV's on eBay. I love working with electronics even though sometimes it can be stressful. I am here to continue learning and help others if I can.

[geekgirl1111]

Re: New Members - please post your introductions here

Hi
I'm 62, MS EE, but little practical experience. I got my degree right before 911 and was out of work for some time. Finally got some tech work but NO design stuff. I have forgotten a lot but I understand it all. Doing retail rep field work now. I keep sending in the resumes......
I just wrote a lot more and it wiped out so this is version 2 with the basics.

[Venomus28]

Re: New Members - please post your introductions here

Hello Forum
New member
33 years old from Albania, Europe
Ive been always fascinated by electronics and i try to help myself and my friends out by fixing all what i can
I have a degree in engineering and currently im unemployed
Thanks to all the old members for their help

[JSat47]

Re: New Members - please post your introductions here

Hi, my name is Justin and I'm very new to electronics repair. I've tried to become a better DIY'er since becoming a home owner. I hate tossing electronics, especially if it seems like the damage is minor and repairable.

I found this site while searching for solutions to a problem with a Panasonic Viera plasma television. I've read nearly every post for my particular model, but still am not confident that I have a correct diagnosis. Hopeful for some help.

[designerr]

Re: New Members - please post your introductions here

Hello, I'm new to this site. Hope this is how you want me to activate from the preliminary restrictions. Thanks

[boredmom]

I am swimming with SHARKS!!! I am just a guppy who loves new and shiny and I love TV!!! I am here to get some assistance on fixing the backlighting issue I have on my dinosaur Westinghouse because I just can't afford to replace it right now. I am a cancer fighter and I am not working right now so all I have is my television.

It is a Westinghouse LD-4655vx and the backlighting in the corners is going bad. I am not a tech genius but I am capable of making small repairs with the correct guidance.

I have been reading some of the posts I am in the company of wizards!!! So help a bored mom out

[terrycw69]

Re: New Members - please post your introductions here

Hey I am also new. Hello everyone my name is terrycw69 Everyone stay calm that's the year of my birth. My back round is in HVAC ,but my dream job is buying computers that most people think are junk and bringing them back to life. It just doesn't pay as much as I would like. I AM HERE TO GAIN WISDOM