New Members - please post your introductions here

[snuggles]

Re: New Members - please post your introductions here

Hello all,
I am Robert, and i have worked in the tv repair industry for decades.I stumbled upon this site from a google search relating to a board id number.

I've always been keen on hardware servicing to component level.I enjoy the challenge,and detest scrapping whole boards or sets due to a few components.

My other main intrest apart from my family,is my old 1971 Valiant Charger which i believe has no electrolytic caps in it.( points ignition,mechanical regulator,no radio)

I just love tinkering and I am learning to use this modern age tool (pc), and look forward to helping others around the forum where I can.

[Coski]

Re: New Members - please post your introductions here

Hi!
I'm Julián, from Buenos Aires, Argentina.
I found this board googling for confirmation on the repair of a MB with swollen caps, and luckily I was able to repair it. Now I have another PC with bad caps (a PCCHIPS xD) and i obviously came right here, and I thought i should register =)
I'm studying electronic engineering and I repair PCs part-time.
I also love to mantain and repair my 1988 Ford Escort (European line, but built here in Argentina).

See ya!

[cantThinkofaGoodName]

Re: New Members - please post your introductions here

Hello all!
I came across this forum multiple times when looking up info on replacing capacitors over the years, and I decided to join because I have some blown caps in odd stuff not yet on the forum, so maybe if I share it I'll get better help fixing it.

I work on computers, so I come across my share of bad caps on mobos, PSUs, LCD monitors, you name it.

I live in canada, so I have limited resources, lol.

[MR REFUND]

Re: New Members - please post your introductions here

Hey:

Just replaced a few caps on the montherboard and the first hard drive is not booting.

What can I do to get it to reboot?

Mike the CPA

[MR REFUND]

Re: New Members - please post your introductions here

I am Mike.

Love to fix stuff. Desoldering is really cool in my books when the system fires back up.

No threat to BAD caps as I am a CPA.

Rock on.

Mike

[harts]

Re: New Members - please post your introductions here

Hi

My name is Jared, found the forum after searching info on how to fix my plasma TV and hope to be able to help others try and save there TV's from the landfill!
Im a pinball fan that has been repairing old pinball machines for the last 2 years.

Jared

[renatototo]

Re: New Members - please post your introductions here

Hi all,

My name is Renato, I like opening stuff and understand how they work.
And do not like to see 'good' stuff going to trash especially knowing most issues are easy to fix and might be planned by the manufacturer.

Greetings from Portugal.

[dws3683]

Re: New Members - please post your introductions here

hello everyone,

I am David and am new here, a Firefighter by trade and a tinkerer by hobby. learned some stuff from my grandfather as a child watching him work on cb's and such.

all in all, i am here to fix the dreaded Gateway FPD1960. Ill let you know how the progress goes!

[Skippy6]

Re: New Members - please post your introductions here

Hello all. I am new here so be kind. I have been a electronic tech my whole working life. I hope I can add some help to this site. My last job was repairing arcade games, so if you have any questions feel free to ask.

[ElectricEel]

Re: New Members - please post your introductions here

Hi - have just come across this site while trying to fix a Dell monitor. I was amazed at the detailed technical help and insight offered by members - one of the best sources of information I have come across on the www.

Am posting this message of introduction as advised in the "welcome" email just received. Have to confess that vintage valve amps are more my area and I have not had a lot of experience with complex PCBs - other than looking for dry joints , bad connections, breaks, visibly burnt components ...and yes (literally) using my nose too!! Although it never ceases to amaze me how many faults on these boards can be fixed by such simple use of the senses (as opposed to years of cranial electronics training) I'm always trying to learn more in this area and look forward to doing so here.

Great site guys!

[shazam]

Re: New Members - please post your introductions here

Hi
I just found this form trying to fix a Intel D102GGC2 board with bad cap.
https://www.badcaps.net/forum/showth...099#post259099

I'm an electronics engineering and computer science student.

[Arie van Diejen]

Re: New Members - please post your introductions here

hi there , i am Arie from Holland, after 40 years of hard working as NDT ultrasonic operator and inspector on petro- and chemical plants i am now about to retire, i will try to fix the gaming PC of my son, a xfx860 with xfx graphic cards in sly, PCU defect, badcaps on both graphic cards, and furter i dont know jet. i will use this forum for updating my little knowledge about electronics.

[Silencer]

Re: New Members - please post your introductions here

Hi I am Martin from The Netherlands (often visiting the USA) , Not familiar with badcaps but have a Sharp TV from a friend that has power issues , hope to find guidance with other users.

[Nilendra]

Re: New Members - please post your introductions here

Hi,

I have done my bachelors in electronics. professional computer mother board technician. i would like to share my knowledge with you all and hope i can improve my knowledge from here as well.

[thevolatile1]

Re: New Members - please post your introductions here

Well hello everybody !!! I'm Kev, from England UK, currently living in Somerset & running a small computer / electronics repair, service & customizing business.. First computer experience was a zx81 many moons ago - bought with the insurance money mom got when my bike was pinched from our garden shed - smart move !! Learned Basic with the old Sinclair manual.. fun stuff.. Trained as a Zanussi engineer years ago, been a car paint sprayer... etc etc, jack of all trades n master of some.. Went & did courses in electronics, robotics - (never came in handy), DTP using yee old Acorn Archimedes back in the day - RISC processors were the bomb back then !! Now doing mainly board level repairs & software installs with a liberal sprinkling of custom spray work to laptops & towers.. Oh, also repair other electricals.. tv, hifi etc etc.. Which has led me here once or twice for shortcuts & why I'm here today..
So that's me !!! Hello peeps..

[MonitorGuy]

Re: New Members - please post your introductions here

Hi, I'm a new member!

I've been into computers since forever and I like to fix stuff as well. I joined today to research a vertical line problem I'm having with my VW266H monitor.

I'm on the East Coast of the US.

I see lots of guys had a Commodore 64, me too!!!! That was a great machine. Prior to that I played with PDP-11's and OSI Scientific uP's at school as well.

[OrderOfSolve]

Re: New Members - please post your introductions here

Hello everyone! I think this is gonna be a great resource for my hobby! I am a maintenance worker at a HUD elderly complex! I enjoy fixing stuff for my tenants! I retired from the manufacturing industry in 2004 due to disability. While in industry i was in electrical support and a mechanic. I have always enjoyed making things work when they don't! I look forward to being part of this community! Thanks

[joe4227]

Re: New Members - please post your introductions here

Hi, All

Just joined the forum to get advice on recapping my collection of aging machines.
I ordered a kit over a year ago, and just getting around to working on a Mac IIci.

The caps I got are the Tantalum SM's but I am replacing mostly the old "crap" Chinese "tin hat" types. Appreciate advice from anyone who has done this!

Machines range from original TRS-80, to Apple IIe Platinum, Apple IIc, Mac IIci, Powermacs 150 and G3...

[Meauxjeaux]

Re: New Members - please post your introductions here

I found your website searching for info on my Samsung LED tv. I do some repair work here at our office and figured this site would be a great tool to help out with my expeditions in electronics failures here at the workplace.
I've been reading all sorts of posts in the forums section and there really seem to be a bunch of knowledgeable people here so hopefully I will be able to take advantage of them soon!
Thanks for the cool site.

Meauxjeaux

[NyNex]

Re: New Members - please post your introductions here

Hy, my name is Mario from Croatia. I joined this forum in sekk for help in repair of PC LCD's, i 'm PC servicer, i know thin or two in electric , my education is elektrotehnic engenier.