Re: Sharp 32" LCD Picture failure Troubleshoot

Thanks budm. It looks like that from reading about it. I have no freeze spray so didnt try that method for checking the screen. I have had the top off and checked the two driver circuit and six ribbon cables with pressure but nothing changed. I have seen youtube vids about ribbon cables comming away but i suspect there is no other fix for LCD with this issue. I am presuming all voltages to tcon are good dont know would bad or low supply cause this issue, Looks like its for Recycle

Re: Sharp 32" LCD Picture failure Troubleshoot

Hi Just joined and yes makes perfect sense to give some pictures sorry for that.
I have four pictures of the main power board. I will take some more pictures with the back cover removed tomorrow. Other picture when set is switched on shows Just verticle line, when channel is changed or i suspect onscreen graphic is ment to be present the white horizontal line shows. Last screen picture shows Half the screen white this is with the L/H t-con disconnected.
I didnt take a picture when R/H t-con is diconected but its...

Hi I have a Sharp LC-32P50E which is about nine years old worked fine until 2 weeks ago screen went to one white horizontal line 2 green verticle bands. I reseated all ribbons and cheaked caps on power board.
I contacted a company on Ebay who suplies second hand t-cons and they said it was probably screen or the driver boards mounted ontop of the screen.
I seen somewhere else where they suggested disconecting one of the ribbons from the t-con. The result when i disconnect r/h ribbon screen goes white on r/h side and stays blank with thin light verticle red line on left. When i...

Re: New Members - please post your introductions here

Hi Mic 49 yr old here living Dublin IRL Repair studio equipment but dabble in other devices too

Thanks