Re: acer aspire 1810tz can not turn on
This is happening to me too.
Any suggestion?
Pyroblast
Member
Last Activity: 12-17-2014, 02:55 AM
Joined: 10-27-2014
Location: EU
-
Re: Ocz600sxs
It looks like the same PCB as the 600 sxs, right?Leave a comment:
-
Re: Ocz600sxs
Yeah, you are right.
I installed my onde 420W LC power PSU and ran the same tests, etc, etc and the PC did OK. I know that this PSU for this system is no suitable.
However that sound that I have mentioned remains and I think that comes from the graphic card.
But the strange thing is that, when running prime95 the PC didn't reboot and while running the 3D Mark Professional he reboots.
With my old PSU (420W) he did well. Played the demonstration video and the tests.
So this means that the graphic card test...Last edited by Pyroblast; 11-02-2014, 06:14 AM.Leave a comment:
-
Re: Ocz600sxs
Thanks for the reply.
Só in your opinion you think that, for example, Dunning prime95 would be enough to teste the PSU? Or it would be a bettwr test to run prime95 AMD after that 3D Mark Professional? Running each onde of them it would be better, bit since is happening this to my computer:
I run prime 95 for 1 hour and everything is OK. While Dunning prime95 I took some measurememts to the +5V, +12V and +3.3V and all of them were good. I mean, all of them were around +-3% or so.
Them, when I run the 3D Mark, first with...Leave a comment:
-
Re: Ocz600sxs
BTW, theoretically speaking, if I run OCCT or Prime95, the CPU will ask for lots of power to the POWER supply, right? That might be a good test to do and see if the PSU ok?
Running the 3D Mark affects the graphic card, so if the graphic card has some problems it will shutdown the computer.
Or maybe because the CPU uses the 3.3V line only that line will be tested? So it might be really the 12V caps that might be in bad shape?Last edited by Pyroblast; 11-01-2014, 04:01 PM.Leave a comment:
-
Re: Ocz600sxs
What you mean by that? You think that the CAPs are going bad and they doesn't handle the power demand?
But I have been monitoring the +12V line while running the 3D Mark, and at the moment the computer rebooted I think that the DMM was showing +12V but it might so fast that I couldn't notice that.Last edited by Pyroblast; 11-01-2014, 03:20 PM.Leave a comment:
-
Re: Ocz600sxs
Hi guys, I have measure the +12V and the +5V lines and those are good. They have 12.38V and 5.025V.
So I don't know why the computer goes down when I run the 3D Mark.
My specs are: E8400, P5E3, 2x2GB DDR3, HD7870 and 120GB SSD.
I think that this PSU should work correctly with system, based on the 600W.
Any suggestions?Leave a comment:
-
Re: Ocz600sxs
I'll be taking the measurements tomorrow in the afternoon. I'll ler you know.
So, that coltage level has that value because of the caps? Better, might be.Leave a comment:
-
Re: Ocz600sxs
Hi Behemot,
Can you explain what you has said? Is this a shitty power supply? This issue can be solved? (By replacing all the caps)Leave a comment:
-
Re: Ocz600sxs
Thanks, I will do that way if I need to upload more images
Leave a comment:
-
Re: Ocz600sxs
Sorry, but I don't know how to upload images here.
When I click on the insert image, what happen is that a small box pops up requesting the URL.
So how can I upload the images into the badcaps host?Leave a comment:
-
Re: Ocz600sxs
Yes, I'll do that. However, supposing that even with the multimeter the results are pretty much the same.
What might be the cause of this issue? This kind of problem has happened to someone here?Leave a comment:
-
Re: Ocz600sxs
EDIT: I forgot to post some pictures of the PSU:
Any suggestions guys?...Leave a comment:
-
Re: Ocz600sxs
Thanks for the reply.
Guys, I have a problem here in hands.
I have tested this PSU, even without replacing yet the caps (because I don't have them right now), to see if it works.
For my surprise the PSU in the 12V line has 9,8V, as you can see in the picture bellow:
[url=http://postimage.org/][/url]
[url=http://postimage.org/]online photo sharing[/url]
What might causing this? Could this be caused by bad caps? The HF transformer that it is not working properly? Or it might be the controller (6800)?...Leave a comment:
-
Re: Ocz600sxs
Thanks Behemot. I have answered already to you
Leave a comment:
-
Re: Ocz600sxs
Hi all in this thread. Diif, allow me to invade you thread.
I have just bought a PSU of this brand, wattage and model. I haven't turned it on, but the person I have bought said to me that it is working properly, even though he is not using it for 1 year.
Before I start working with her, I though in changing all the capacitors and some of the most vital semiconductors.
I'd like to hear from you, some advices on what should I do before start working with this PSU.
For example, from what Mr. Behemot said, we need to...Last edited by Pyroblast; 10-27-2014, 06:09 PM.Leave a comment:
-
Re: The GOOD Capacitors Thread!!
Hi guys,
I am planning to change the capacitors on my 600W computer power supply. The input filtering capacitor as well as the output capacitors.
I would like to know which good capacitor brand is suitable for this kind of applications.
I don't know if you guys need the brand, cap size and voltage rate of the capcitors that are in the power supply. If you guys need that info, please let me know.
In the electronic store next to me they have those brands:
Cornell Dubilier, Elna,...Leave a comment:
-
Re: New Members - please post your introductions here
Hello all. I am new to the forum and I am a student.
I am really looking forward to help and be helped.
Cheers!Leave a comment:
No activity results to display
Leave a comment: