Re: 440 g7 computrace
hello,
i need 440 g7 bios files ec + main,, my board worked today but i programmed 450 bios to my 440 mainboard... mainboard cannot work after update bios progress.. when i reprogram or clean me bios charge led on 15sec and no power on. thank yo
hexadecimal
Member
Last Activity: 11-20-2024, 04:29 AM
Joined: 03-14-2015
Location: sivas
-
Re: IdeaPad 1 15IGL7 Laptop - Type 82V7 / JS47R&JS57R NM-E791 REV 1.0 no display
have not any schematic or boardview...Leave a comment:
-
IdeaPad 1 15IGL7 Laptop - Type 82V7 / JS47R&JS57R NM-E791 REV 1.0 no display
i found error at 3.3v regulator and i changed..
cannot have any schematics..
board have 1.20v 1.00v 3.3 - 5.1v all ok
charging led orange
power on
bios is ok and tried new
no display -
Re: IdeaPad 1 15IGL7 Laptop - Type 82V7 / JS47R&JS57R NM-E791 REV 1.0
thanks.
but not worked
no display and 0.120a current maybe have another mainboard problem.
cannot have any schematic or boardview...Leave a comment:
-
Re: IdeaPad 1 15IGL7 Laptop - Type 82V7 / JS47R&JS57R NM-E791 REV 1.0
This is original readed....Leave a comment:
-
IdeaPad 1 15IGL7 Laptop - Type 82V7 / JS47R&JS57R NM-E791 REV 1.0
Hi. i need IdeaPad 1 15IGL7 Laptop - Type 82V7 / JS47R&JS57R NM-E791 REV 1.0 bios dump
i was extracted on lenovo website exe file end cut bios region.. but not workied..
board always on and 0.110a current only..
irepaired 3.3v ic liquid damage.
now all voltages on way.
thank you for your support. -
Re: HP 15-CB007NT - DAG75AMBAD0 REV
powerdown after 4 seconds
yes, all gpu voltages ok about 4-5secons..
gpu memory coil at 1.35v
nvvds coils at 0,80v
gpu core voltage graphic ______/--------\__/--_______...Leave a comment:
-
Re: HP 15-CB007NT - DAG75AMBAD0 REV powerdown after 4 seconds
Hi, thank you for your support
PLTRST# signal is 3.3v for 4sec, when i press power button.
and
CPU_PLTRST# 1.00v...Leave a comment:
-
HP 15-CB007NT - DAG75AMBAD0 REV:D powerdown after 4 seconds
hello, mainboard is KABYLAKE version and i tried all bios version,, when i write not kabylake bios: and ram removed board is power on, but powerdown after 4seconds when ram installed..
kabylake version bios: powerdown 4sec ram installed or not installed..
all core voltages ok.. rsmrst and powerok voltages ok..
please help, thank you -
Re: AMD 6800XT - memory corruption - how to test it?
did you test it?Leave a comment:
-
Re: Software to analyze Video RAM faults on graphics cards?
how to vram test amd rx6800xt or 6900xt models? i have 5 partition bootable test disk but cannot test at 6800-6900 selection? thanksLeave a comment:
-
Re: Acer A515-51G need bios dump LA-E892P
Well done. Worked. Tested OK.
Acer Aspire A515-51G C5V01 LA-E892P Rev 1C - Main + EC BIOS
include 8mb main and 128kb ec files...Leave a comment:
-
Re: Acer A515-51G need bios dump LA-E892P
hi im trying but i also need ec rom 128kb.. yesterday i wrote invalid bin file(e891p) thank you...Last edited by hexadecimal; 09-18-2022, 04:11 AM.Leave a comment:
-
Re: Acer A515-51G need bios dump LA-E892P
I need a Acer A515-51G-81HE
LA-E892P
C5V01 REV 1C
BIOS + EC
TNXLeave a comment:
-
Re: ESONIC H61FHL es bios dump pls
thank you. itried but not worked. only power on. no any response.
Leave a comment:
-
Re: ESONIC H61FHL es bios dump pls
i tried clean me but not worked. Card only power on. no any beep errors. thank you...Leave a comment:
-
ESONIC H61FHL es bios dump pls
i need H61FHL ES BIOS DUMP BIN FILELast edited by hexadecimal; 08-06-2022, 04:48 AM. -
Re: MacBook Air A1465 820-3435-B
please clean-me bios for MacBook Air A1465 820-3435-BLeave a comment:
No activity results to display
Leave a comment: