Hi,
after many days I've back up the ssd and made firstly a Revive then a Restore of all the system , the operations completed successfully without errors but still the display doesn't come on...
Connecting to an external hdmi monitor, graphic is clear, no problems or glitches, and still in general settings I can see both monitors connected to the system, the external tv and the internal Liquid Retina XDR.
When I close the lid, in general settings internal display fades out and the external tv is still there.
Strangely, I'v disconnected the three flat cables that go to...
modtool
Senior Member
Last Activity: 12-19-2024, 04:52 AM
Joined: 07-02-2015
Location: Florence
-
No, the external display is not affected in any way byt the closing of the lid assembly. both if the sensor is connected and if it is disconnected, the external display remains always on.
Do you think that a revive in DFU mode could lead to a solution?Leave a comment:
-
Macbook Pro 14 2021 - A2442 - 820-02098-A - Internal display not turning on but MacOS working good
Dear collegues,
the owner of this machine brought it to me saying that suddenly one day the display didn't turn on anymore, he tought that all the machine was damaged but it turned out that the MacOS starts good and stays on, and that connecting it to an external display it works without problems.
If you take a look into general settings, you can also see that the internal retina display is recognized as connected by the main board but for an unknown reason it doesn't turn it on.
I've tried to put a bright light towards the screen but I can't see anything, any shadows or apple... -
Hello, I'm sorry to revive an old thread, can anyone have any suggestion?Leave a comment:
-
Hi to all,
I've received a new bios IC, I bought a Winbond W25Q128JWSIQ (as seen in the datasheet of this board), wrote into it both the same binary extracted from the Gigadevice IC and a new freash untouched FSCN14WW (same version as the one installed originally), but the problem is not solved
The error "BIInitializeLibrary failed 0xc0000185" shows up everytime I try to boot some disk (nvme or usb), and the display stays empty (but keyboard work and I can reboot by crtl+alt+can) when I try to go into BIOS settings through F2 or the Novo button.
Since I've...Leave a comment:
-
Hi [USER="237374"]SMDFlea[/USER],
thank you for your suggestion, I've already tried other SSDs, HDDS , even empty ones and that error shows up every time, even if I try to boot a USB installation disk with Win10 or Win11.
When there's no disk in any port, in place of that error the system shows "Checking media", then goes to the LAN request window for two times, and after it shows "No boot media found" window.
The suspecting thing is that I can't even enter the bios settings, when I try F2 or the Novo button, it goes to a black screen with the mouse...Leave a comment:
-
Hi [USER="149220"]mcplslg123[/USER]
thank you for your advice.
I've used the 1,8v adapter on the CH341A programmer, but sadly I don't have any SVOD or similar programmers to flash the internal eeprom inside the IT8227E-192EC, that's why I tried to start the Crisis procedure that I think can flash the same EC during the whole process automation.
I've searched for an "FD" reference inside the bios binary but I didn't find any...
If I upload the file, can someone take a look inside it in order to find the Crisis filename?mcplslg123Leave a comment:
-
Lenovo Legion 5 15ARH05H, NM-D281 Rev 1.0, "BIInitializeLibrary failed 0xc0000185" and bios freezing
Dear members,
I have a problem with this machine that still I can't solve, I hope some of you can suggest me something.
I was the first one to open the machine and touch the mainboard, in fact the Lenovo seal was intact the first time that I unscrewed all the internal screws.
The ower told me that it was working very good until Windows kicked "something like a firmware update" (owner's words) then the system started acting weird.
When you try to start it, some seconds after having pressed the power button, Lenovo splashscreen appears, then after 1 second, in the... -
Re: Macbook Pro A1989 fallen, reboots if touchbar connected
Hi Stephen,
thank you for the hints, a new touch bar arrived, I installed it and everything has gone well, no more reboots and who knows what other problems it could have caused in future MacOS updates.
Have a nice day
Leave a comment:
-
Macbook Pro A1989 fallen, reboots if touchbar connected
Hi to all,
the owner of this macbook brought it to me after a fall, that hit the upper right corner of the top case.
Luckily enough, the screen and all other parts of the machine haven't been damaged, only the touch bar wasn't lighting up anymore, and the macbook began to behave strangely, because it seems to start and work fine but suddendly it shutsdown (and at the same time the fans make a high rotation for half a second, as if an animal was annoyed by something...) at random times, sometimes after 2 minutes, sometimes after 5 minutes, but never over 10 minutes, then restarts... -
Re: Sony PS4 slim CUH-2216A power supply ADP-160FR not working after short in PFC
Hi theManieq, sorry for this late reply but thank you for your help and will to measure !
It's very useful to know that 12v from Q41 isn't present in standby, this changes my point of view about the "power sequence" of this power supply .
I have a chance to test the ps4 with a compatible power supply, i.e. the N17-160P1A , the console works correctly so it must be a problem within the ADP-160FR itself.
The two power supplies have different components...Leave a comment:
-
Re: HP EliteOne 27" 1000 G2 - Shorted USB - MainBoard DAN11AMB8H0 REV:H
Hello,
no sugestion about anything?
I know that this machine is not so widespread, but maybe someone can reach some datasheet or boardview?
Do you know if the absence of the Thunderbolt controller JHL7340 and its firmware chip may block the power sequence?Leave a comment:
-
Re: Sony PS4 slim CUH-2216A power supply ADP-160FR not working after short in PFC
Thank you @sjt and @theManieq .
I will check the 5VSB line, in the meantime I can tell you that voltage on big caps doesn't change when shorting ACIN_DET and ACIN_STBY (maybe because IC41 and IC32 aren't getting 15v), and it's stable at 320v.
I already took some measures around optoisolators (red probe to respective GND, black one on pin), before and after shorting ACIN_DET and ACIN_STBY :
IC53
1 1510 0.00 0.00
2 672 0.00 0.00
3 000 0.00
4 600 0.06 0.06...Leave a comment:
-
Re: Sony PS4 slim CUH-2216A power supply ADP-160FR not working after short in PFC
I'm sorry @stj, I was too quick to read your words ...
I thought you suggested to test the 12v rail instead you meant the 5VSB.
I tested it as you told me and the lamp lights up correctly, and the 5VSB (and AC_STBY) doesn't fall down.
What can you suggest next?Leave a comment:
-
Re: Sony PS4 slim CUH-2216A power supply ADP-160FR not working after short in PFC
Hi stj,
thank you for the suggestion, I have tried some minutes ago but I don't see any light from the lamp, at the same time measuring tension at the 12v output I don't see any voltage nor little spikes, it's completely unresponsive.
After having shorted 5VSB with AC_STBY, 5VSB and AC_DET fade down and you can restart them only by pulling the mains e reconnecting them again.
At this time, I can't figure out if the culprit is IC151 itself broken or it's because it works good and it...Last edited by modtool; 06-05-2023, 01:47 PM.Leave a comment:
-
Re: Sony PS4 slim CUH-2216A power supply ADP-160FR not working after short in PFC
Hello, has anyone a suggestion on how to proceed, please ?
Do you know what tension are active when this power supply is working good, in standby and when activated?
Such as on IC55, IC151, Q41?Leave a comment:
-
Re: Sony PS4 slim CUH-2216A power supply ADP-160FR not working after short in PFC
Thank you @lotas for the suggestion,
I did as you say but the behaviour is the same.
The 12v rail doesn't try to start, not even a little spike, and then the 5VSB fades out.
If I unplug the mains and reconnect them after at least 10 seconds, 5VSB comes on again.Leave a comment:
-
Sony PS4 slim CUH-2216A power supply ADP-160FR not working after short in PFC
Dear forum members,
I'm working on this power supply for ps4 slim, that behaves in a similar manner as other cases but I can't find a way to solve the problem.
When it came to me, externally the ps4 had standby voltage, clicking the disc eject button made the triple beep (without disc inside) and cliking on the power button made the blue power light turn on and then all turned off within 1 second.
When I opened it up, I found these components shorted:
Q6 24N60M2
IC41 1612A (not really shorted but had a hole on it and all pins measured open circuit but the 9th... -
Re: HP EliteOne 27" 1000 G2 - Shorted USB - MainBoard DAN11AMB8H0 REV:H
Hello,
one week has passed...can anyone give me some advices on this machine?
Have you seen schematics or boardview somewhere?
ThanksLeave a comment:
-
HP EliteOne 27" 1000 G2 - Shorted USB - MainBoard DAN11AMB8H0 REV:H
Dear forum members,
I'm trying to repair this All-in-one machine that had a problem in the usb-c port, maybe the owner connected some shorted device and caused a disaster.
I found that were shorted :
Southbridge Intel Q370 SR404 (shorts on main core, 3v rails and data lines on usb ports)
U89 Intel JHL7340 Thunderbolt controller
U22 MX25L8006E Thunderbolt controller firmware IC (with a little bump on it)
When I unsoldered these 3 ICs , the main 3v line has returned to a normal value, around 400mV (measured with red probe on GND and black one on...
No activity results to display
Leave a comment: