Re: LG 50PV400 Have Sound but No Picture
Ok,bringing this post back from the dead,lol,haven't had much time lately,but am ready to do some more testing.
I've checked the y-buffers for shorts and don't appear to have any,I also ordered a tested set from ebay,with no change when installed,still no picture at all.
VSC on the Y-sus board is supposed to read 150v as per sticker,but with either set of y-buffers I have,hooked up,the VSC jumps from 150v to 190v and is not adjustable with them hooked up.If I unhook the buffers,the VSC drops to the right 150V,and...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Last edited by sickofit; 12-13-2015, 01:43 PM.
-
Re: LG 50PV400 Have Sound but No Picture
I know nothing about this stuff,i'm learnin.....but the training manual says to never run set with just P121 disconnected,which is the ribbon cable connecting the 2 upper\lower buffers,and also never run the set with P213 disconnected which is the ribbon cable going from y-sus board to lower buffer,and P221 which again is the ribbon cable going from the bottom buffer to the top buffer...says damage will occur.Here's a paste from the manual.Its stated in a couple other spots through the manual NOT to run the set with those just disconnected,to...
Leave a comment:
-
Re: LG 50PV400 Have Sound but No Picture
Ok......now I think we're getting somewere..!!..
With both side Y-buffers totally removed,I got a reading of VSC-155V(remember I was playing with adj),and I was also able to adj the voltage this time,so put it to 150V where tag said it was supposed to be.
-Vy stayed the same at 190.2V tag says 190V
So do you think its safe to say I need to order up a set of Y-Buffers..??
This site rocks..!!!..
Leave a comment:
-
Re: LG 50PV400 Have Sound but No Picture
Ok,i'll get at that soon and report back....glad I found the training manual on this site......as with this set I cant just unhook them,it says in manual they have to be completely removed or damage will result.
Leave a comment:
-
Re: LG 50PV400 Have Sound but No Picture
Wow...Thanks for the quick reply.......Ya,I always like to try and fix whats broke,kind of a dying art these days.
Ok,have done some readings and this is what I have found.
Power supply Vs tag reads 203v,I get 205...Va tag reads 55V,I get 55.2
Y-Sus board VSC tag reads 150V,I get 191.3.....-Vy tag reads 190V,I get 190.2
Z-Sus board Z-Bias tag reads 130V,I get 129.5
So the only reading that appears to be off is the VSC on the Y-Sus board,and while keeping...
Leave a comment:
-
LG 50PV400 Have Sound but No Picture
Ok,about 2 weeks ago the tv all of a sudden had a dark thin vertical line from top to bottom,almost in the middle,just a little more to the left.It is a bedroom tv so didn't much care,as was still watchable.
Well last night we were watching it and all of a sudden the display went dark,like it was turned off...but the sound was still working...uh oh....turned it off,left it for a minute,tried it again..same thing...sound works but nothing on the screen...all buttons work as usual,can turn vol up\down..tv turns on\off ok...just no picture..tried dif input,same thing.
...
No activity results to display
Show More
Leave a comment: