Re: LG Plasma 60pn6500-UA red screen

Below is a link to the one that I bought. It is listed a replacement for the original board. So far I have not had any issues. The new part number is EBT62753601. hope this helps

[url]https://partstore.com/Part/LG%20Electronics%20Incorporated/LG%20Electronics%2fZenith/EBT62753601/New.aspx[/url]Re: LG Plasma 60pn6500-UA red screen...is helps<br />

Re: LG Plasma 60pn6500-UA red screen

I re seated the LVDS on both the control board and main board and did not see any improvement.

Re: LG Plasma 60pn6500-UA red screen

I had tried that prior to posting on here and saw no improvement. I will try it again tonight.

On a side note I've been doing some research in the event I need to replace the board. It does not seem to be as readily available as the other boards. This leads me to believe the boards with part number EBT62394201 and board number EAX65071307(1.1) may have had a manufacturing defect of some sort since no one can seem to keep them in stock. Some of the websites I have looked at list substitute parts. Is there any way knowing for sure...

Re: LG Plasma 60pn6500-UA red screen

The hair dryer had no effect on the picture.

Re: LG Plasma 60pn6500-UA red screen

I just performed the test you suggested and all test patterns displayed clearly with no red or blur. Then for the hell of it I ran the same test with LVDS attached to the connected and that performed clearly as well. Does the ext auto gen just bypass the main AV board? When I removed the jumper with LVDS connect I got a red screen (normally black) with the no signal message.

If I'm understanding the test you had me run I think this means the main board is bad?? is that a correct assumption?

Re: LG Plasma 60pn6500-UA red screen

I was able to some additional pictures of the boards/ part numbers if they are any help in diagnosing my problem....

Hello,

I have an plasma LG 60pn6500-UA manufactured in 2/13. A few weeks ago I started notice a slight red distortion coming and going on peoples faces and other lighter scenes. The other night the screen became virtually unwatchable with red distortions on all dark areas as well. I've checked on all other ports and menu screens and the problem exists. (I did find the HDMI2 does not work. )I have also reseated all connections and checked the solders on the x and and y sus for cracks and all looked good. Since the HDMI 2 port does not work I am wondering if this is an main board...

Re: New Members - please post your introductions here

Thanks for all of the great info on this site.

Bob