Re: Samsung LE37C630K1W buzzing sound
I haven't tried that, but I will try to see if this fixes the problem.
Marco90
New Member
Last Activity: 08-11-2016, 11:19 AM
Joined: 07-22-2015
Location: Groningen
-
Samsung LE37C630K1W buzzing sound
Hello,
I have a Samsung LE37C630K1W that starts making a buzzing sound as soon as I turn the TV on.
The picture and everything is fine, but this noise is very irritating.
The source of the sound is comming from the inverter board.
Inverter board type: E206453 Model V298-5xx.
I'm wondering if replacing this board will fix the problem or if there is another possible cause for this problem. -
Re: Panasonic P42G20E - no picture/sound
Still the same with the K-board disconnected.
So most likely the A-board is defective. Are there parts on the A-board that I could check and replace? Or do you recommend finding a new part.Leave a comment:
-
Re: Panasonic P42G20E - no picture/sound
I've disconnected sc2, sc11, p35 and the 3 ribbons on de A board and everything is still the same. The relais keep on clicking with an interval of aroind 15 seconds. Still no error code showing up.
All voltages, p15 vsus and vda are 0.Leave a comment:
-
Re: Panasonic P42G20E - no picture/sound
There is no error code error code showing.
Just a solid red light.
But when I press power on the remote before the relais start to click again it turns green. If I wait after the click it won't turn green.Leave a comment:
-
Re: Panasonic P42G20E - no picture/sound
Does anyone have an idea on why the voltage output is so low?Leave a comment:
-
Panasonic P42G20E - no picture/sound
Hello everybody,
I have a problem with my P42G20E.
When I turn on the tv the red light goes on and the two relais on the P-board give a click (one gives a fast click the other stays on). After about 10 seconds the relay turns off and the other one will give a quick click followed by the second one which stays on again. This keeps repeating.
If I push the on button on the remote before the tv clicked again the led will turn green, however when I wait for the relais to click again the light will not turn green.
I found a service manual and checked... -
Re: New Members - please post your introductions here
Hi
My name is Marco
And I hope that I could get some insight in why my panasonic stopped working.
CheersLeave a comment:
No activity results to display
Leave a comment: