I know this series is "audio grade", is this limited to using the audio signal path?
Has anyone tested the performance of this series of capacitors in the energy reservoir stage after rectifier in linear PS?
felipeunix
New Member
Last Activity: 07-24-2022, 10:08 PM
Joined: 08-05-2015
Location: São Paulo
-
-
Re: M-Audio Firewire 1814 MOD-Caps
How did this conclusion? (I will look for this topic)
At least in anything we've ever tested (Diy) always got better results with ELNA and Nichicon.
I know this may seem, "personal" but I have worked with music production, I believe that most people who say they have no difference in capacitors is because they are not acostumas to notice the small details, which are actually the biggest difference.... -
Re: M-Audio Firewire 1814 MOD-Caps
Well, what I did was:
[B]1[/B] - I can use low ESR at all.
[B]2[/B] - The capacitance values than I thought change would not make much difference.
ok?
[B]doubt:[/B]
You would not use the same capacitors at all, is it?
Put others in this area to have a "contrast"?
Yes, even if they are good, I'll replace them anyway.
Did you say that any capacitor Japanese general purpose, are at least more reliable...Leave a comment:
-
Re: M-Audio Firewire 1814 MOD-Caps
Let me get this straight ...
Did you say that the wisest course is to keep the capacitance values, and can replace [B]ALL[/B] by ELNA Silmic II and be happy?
PS: The largest power input capacitors (1000uF) you think they are bad?
I'll replace all yes.
Again, thank you for attention Khron666!
Re: M-Audio Firewire 1814 MOD-Caps
Let me get this straight ...
Did you say that the wisest course is to keep the capacitance...Last edited by felipeunix; 08-05-2015, 10:15 PM.Leave a comment:
-
M-Audio Firewire 1814 MOD-Caps
[U]First of all. Sorry for bad english.[/U]
[B]Friends ... I bring you, firewire 1814 (milf) naked.. [/B]
"I made several pictures of her, because I have not found anywhere inside the images (if anyone wants to, just ask)."
Well, I will try to be as direct as possible.
[B]Initial reason:[/B] I was with noise problems at one of the headphone outputs, so I just replaces one of the capacitors near exit headphones (10uF / 10V) and the problem was solved!
So I thought .. [B]I'll change everything right...Last edited by felipeunix; 08-05-2015, 01:35 PM. -
Re: New Members - please post your introductions here
I just met the forum and I was delighted with such quality information, I'm in love *-*Leave a comment:
-
Re: H-E-L-P! How do I learn to use my new oscilloscope?
Nice, thanks!...Leave a comment:
No activity results to display
Leave a comment: