Re: hp elitebook 745 g6 amd bios unlock

TL;DR: It was U365. Take out the mobo and do it to U366 found in almost the same place [I]under/opposite[/I] the SSD, not [I]beside[/I] the SSD.

The silkscreen showed what appeared to be "U366" in that area, but after I took a decent photo and zoomed in, it was U368 ever-so-slightly misprinted by part of the 8 landing on a via. I briefly thought the IC definitely [I]should[/I] be U365 because "U366" (U368) was farther away, and CN365 is right on top of it, as if a socket would go on that SOIC-8-like footprint...

Re: hp elitebook 745 g6 amd bios unlock

I also tried HPUnlocker and it merely changed the earlier part identically, skipping those many groups of 0xff. Maybe it means this should be enough... I will try to flash again.[CODE] 00027260 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00027270 12 00 00 00 c0 11 00 00 ff 87 66 f6 f3 8c 19 4a |..........f....J|
00027280 b4 ac f5 f0 b7 8e 4d 18 55 00 73 00 65 00 72 00 |......M.U.s.e.r.|
-00027290 43 00 72 00 65 00 64 00 00 00 02 00 00 00 00 00 |C.r.e.d.........|
-000272a0 00 00 02 00 00...

Re: hp elitebook 745 g6 amd bios unlock

I removed and tried RCUnlocker on the contents of what I [I]think[/I] is U366, actually a W25Q128JV sitting snugly between the M.2 and DIMM2 slots, and I'm still locked out of setup.

In case it helps, here's what I did, essentially:
[CODE]# flashrom --programmer buspirate_spiev=/dev/ttyUSB0 -c "W25Q128.V" -r spidump.bin
flashrom v1.3.0 on Linux 5.10.160-gentoo (x86_64)
flashrom is free software, get the source code at https://flashrom.org

Using clock_gettime for delay loops (clk_id:...

Re: Graphics card Schematics and Boardviews



Thank you for sharing this! I'm afraid it's rather different, being for -[B]pi[/B] and not -[B]pL[/B]. But it is the first thing I've seen that also uses the uP9501 PMIC, for which I couldn't find a datasheet... so I should still get some clues from it.Re: Graphics card Schematics and Boardviews



Thank you for sharing this! I'm afraid it's rather different, being for -[B]pi[/B] and not -[B]pL[/B]. But it is the first thing I've seen that also uses the uP9501 PMIC, for which I couldn't find...

Re: Graphics card Schematics and Boardviews



It's probably not the same exact board but the parts' ID numbers and layout in your photo look [I]very much[/I] like [URL="https://www.badcaps.net/forum/showthread.php?p=1095552#post1095552"]the one I posted a while back[/URL]. It might be informative.

What's your board's number from the back? for example here's the one I need:Re: Graphics card Schematics and Boardviews



It's probably not the same exact board but the parts' ID numbers and layout in your photo look [I]very...

Re: Graphics card Schematics and Boardviews



What is the board's part number? I have a dead Asus PH-GTX1050TI-4G with the number CG210PL 1.01, and I mistakenly got a boardview for the CG210PL3 which is very different, though the whole card seems to have the same model number. I can find what should be the correct boardview for sale on a couple of non-English sites, and I managed to sign up and navigate enough using google translate. But that was just to find out that I still can't buy it (yet) because apparently various overseas online payment processors don't deal...

Re: New Members - please post your introductions here

Hello. (again, but who's counting)