Re: PS5 cut off or freeze on main menu
hi
thanks for a quick answer.
Time to freeze is not constant but freezing is everytime when i try to run a any game.
stormanimal83 :i subscribing a the cod3r YT channel but i cant find any similar case
JonnyS
New Member
Last Activity: 10-29-2024, 06:26 AM
Joined: 04-01-2016
Location: NA
-
PS5 cut off or freeze on main menu
hi
i have a problem with PS5
that cut off or freeze on main menu
i try to rebuild database - not helps
reinstall software and factory reset - not helps
not helps
can somebody have idea what i can do more ?
i will be very thankfully.
kind regards -
Re: SVOD3 debug ZIF programming PCB
hi can u can upload better quality of ITE board because is shifted ans not sharpen
and 2nd question
on ite you are have not every ITE point bridged are this is ok and working
i will be very thankfoullyLeave a comment:
-
Re: PS4 pro PSU ADP-300CR shuts down when turning on 12V
any ideas ?Leave a comment:
-
Re: PS4 pro PSU ADP-300CR shuts down when turning on 12V
am sending the board photos...Leave a comment:
-
PS4 pro PSU ADP-300CR shuts down when turning on 12V
Hi,
I would like to ask for your help to troubleshoot a faulty PS4 pro power supply
I have a st_by voltage ane when i try to power on 12v line PSU shuts off
i measure lot of components but i don't fins faulty piece ,
when i try to power on 12v line voltage increasing to ~420v so it looks like PFC was working,
Now i have no idea what i can do more to fix it and i will be very helpfully to help me in this case.
-
PS4 adp-300cr
Hi everyone,
i have problem with PSU after it fail, i found shorted q3 ,q4 and browned R5
after replace it and powered i get 5v stby
but if i try to power up 12v it blow immediately q3 ,q4 and R5
pls help me to fix it
kind regrds -
GIGABYTE GA-MA770-DS3 rev2
i have a mainboard
issue no power up only fans spin up and down that's all
i remove all component but nothing change
even without cpu still the same
the board is based on 218S7EBLA12FG and 215NDA7AKA21FG
i will be thankfully for any helps -
Re: HP Compaq 7620s 7 flashes of death.
Hi i have the same issue on not liquided board i try many options but no success
voltage on
L533 - 5,1V
L521 - 3,4V
L527 - 1V
L3 - 1,3V
L503 AND L504 NO VOLTAGE
I DONT HAVE IDEA WHAT IT CAN BE( SO PLEASE ADVISE ME IF SOMEBODY HAVE IDEA
Leave a comment:
No activity results to display
Leave a comment: