Re: Clear ME Lenovo carbon x1 2-gen i7
your problem solved or not?...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
-
Re: MacBook air Model A1466 EMC 2925 820-00165-A
try it
...
Leave a comment:
-
Re: Asus UX550VD no power
actually how much voltage is getting on the fet gate ?
Leave a comment:
-
Re: dell workstation t7910 clean ME
thank you very much sir i'm so happy because first time i asking for a help and i got it "thank you" let me check and tell you later.
Leave a comment:
-
Re: clean me
here is my bin sombody help me the problem is 30second after dell logo is comes and working fine...Last edited by shibu; 08-12-2020, 06:10 AM.
Leave a comment:
-
dell workstation t7910 clean ME
dell workstation t7910 help me pleaseLast edited by shibu; 08-12-2020, 05:59 AM.
-
-
Re: Dell XPS 9560 AC Adapter Unknown
hi the ad_id circuit is almost same every dell motherboard so you can trace any dell diagram to find out just search in diagram adp_id/psid/pjpdc/dc jack!!!!
Leave a comment:
-
Re: macbook air user password
hi there as the picture its not a user password its firmware password
so you can remove it if you have a spi flash programmer and skill for some editing binary
Leave a comment:
-
Re: svod programmer
i have using svod and vertianov i thing vertianov is much easier
Leave a comment:
-
Re: Acer v17 nitro wont turn on
check the pch power 1.05v area
Leave a comment:
-
Re: Lenovo Air 14IKBR EYG20 EYG10 NM-B601 charge problem
hey buddy your problem solved or not ? i thing the problem with not EC you need to check main power line FET's and the pin 28 vcc on bq24780s it's should be 18v to 20v
if not there is a diode and a resostor from main line the resistor mostly value are 10 to 20 ohms!
Leave a comment:
-
Re: ITE series not detected in svod Solution.
pull a 3.3v power from another source to it8586 pin 26 or there is as small coil its calld as per the diagram LE1 and dont connect main power or batteryLast edited by shibu; 06-25-2019, 01:50 AM.
Leave a comment:
-
Re: New Members - please post your introductions here
about me.
I'll give a little info... I've been in the electronics field since 1997, with experience ranging from TV/VCR/CAMERAS and repair all consumer electronic product. I started in computers in 2005, just for a change and something I thought would be more challenging.... First of all, in the computer field, I AM NOT a number cruncher (programmer) because I'm a hardware/mechanical... I can install any OS, repair and make it work. but nearly coming too much problems with the BIOS so i learned almost every editing,and...
Leave a comment:
No activity results to display
Show More
Leave a comment: