Re: Bosch washing machine dies after 15 seconds
Update: I got a second hand board same model 5560 004 325 but from Siemens and the washing machine works again. Thanks again for all your advice. I am happy that I posted it here and manage to fix it for 15€. You can really see how much better quality Siemens board is compared to Melecs board. On my washing machine they really cut corners to keep the cost down. Lesson learned just buy 5 year warranty model to avoid this kind of problems. I will attempt to fix the broken board if the replacement dies until then keep helping newcomers...
Audison
Member
Last Activity: 06-04-2018, 02:31 PM
Joined: 09-06-2016
Location: Ljubljana
-
-
Re: Bosch washing machine dies after 15 seconds
The model number is WAA28162 (Bosch Classixx 5) but I can't find the test mode...
I checked everything motor, broken wires, door lock and pump and all works fine.
Also tried running the cold water program and tried to disconnect one connector at the time to see if I can find what the problem is but every time is the same. The program continues running but after one spin it shuts down. If I disconnect the power and reconnect it after the door unlocks in will work again for one spin and shut down again......Leave a comment:
-
Re: Bosch washing machine dies after 15 seconds
After a closer look I see now that there are some elements burned :O
Is this fixable? What kind of elements are they? I will try to remove them from the board tomorrow...
Also what cause them to burn? it's something else broken on the washing machine or just fired because poor elements quality??...Leave a comment:
-
Re: Bosch washing machine dies after 15 seconds
Only 2 year warranty that expired already. For this model you needed to buy extended warranty for 50 € for additional 3 year warranty...
Took out circuit board and it looks good visually
Also I am not from Germany but looks like the supplier of the shop where we bought this washing machine imported it from Germany...
Everything turns off. Than I have to disconnect it for a minute and connect it and it works again for 15 seconds......Last edited by Audison; 07-17-2017, 11:06 AM.Leave a comment:
-
Bosch washing machine dies after 15 seconds
When I select program waschen light pulses like it does normally and than just dies. If I try to start the program immediately than the program starts and dies after a few seconds. How do you even figure out what is wrong, there is nothing to check? Or am I missing something? Images in the attachments......Last edited by Audison; 07-17-2017, 10:22 AM. -
Re: Asus P5E-VM DO Cap replacement advice
[url]http://www.windowscentral.com/how-link-your-windows-10-product-key-microsoft-account[/url]
This might help you reactivating your windows.Re: Asus P5E-VM DO Cap replacement a... your windows.Re: Asus P5E-VM DO Cap replacement advice
[url]http://www.windowscentral.com/how-link-your-windows-10-product-key-microsoft-account[/url]
This might help you reactivatingLeave a comment:
-
Re: Corsair CX430
[url]https://seasonic.com/[/url] - very high quality
[url]http://www.evga.com/products/ProductList.aspx?type=10[/url] - decent quality
[url]http://www.super-flower.com/powersupplies.html[/url] - ok qualityRe: Corsair CX430<br /> <br /> [ur...] - ok qualityRe: Corsair CX430
[url]https://seasonic.com/[/url] - very high quality
[url]http://www.evga.com/products/ProductList.aspx?type=10[/url]Last edited by Audison; 10-19-2016, 02:01 PM.Leave a comment:
-
Re: speakers for bathroom?
[url]http://www.bose.com/prc.jsp?url=/shop_online/speakers/outdoor_marine_speakers/index.jsp[/url]Re: speakers for bathroom?<br /> <b...ndex.jsp[/url]Leave a comment:
-
Re: philips 170s turns on for 1s and than dead
Case closed on this monitor. The panel would work fine but we made a mistake when disassembling the panel and that is the reason why there is only half of the screen picture.
I might buy the broken part when I get a chance to get this panel working once again but for now it's going into storage.Leave a comment:
-
Re: philips 170s turns on for 1s and than dead
Update: We gave up on fixing the back-light inverter as we are too stupid to figure it out.
So we used a led strip for back-light instead
Perfect fit.
Testing strip
Looks good enough better than previous lamp light
Back-light fixed but now it looks like we have another problem
Only half of the screen is displaying image. We were very stupid to not test this before we even started fixing this display. I can speculate that the panel was working before we...Leave a comment:
-
Re: What is a Pentium 4 capable of in 2016?
Pentium 4 is unbelievably slow and power inefficient for usage in 2016. Try installing Windows 10 for example. Or just simply browse more demanding websites. It cannot cope even with the simple tasks like that. I tired everything with my [url=http://ark.intel.com/products/27501/Intel-Pentium-4-Processor-supporting-HT-Technology-3_20-GHz-512K-Cache-800-MHz-FSB] P4 3.20 GHz[/url] and it was just unusable on windows or linux. Got [url=http://www.cpu-world.com/CPUs/K10/AMD-Phenom%20II%20X3%20710%20-%20HDX710WFK3DGI%20%28HDX710WFGIBOX%29.html]AMD...Leave a comment:
-
Re: philips 170s turns on for 1s and than dead
Measurements of transformers and connectors for the monitor back light. It outputted 5v for a brief second when the back-light turned on and than it dies. Transformers show 0V if there is power applied......Last edited by Audison; 09-30-2016, 07:22 AM.Leave a comment:
-
Re: ATI 4670 dead
NV GF7300GS 256MB DDR2 TV DVD PCI-E - works for few minutes than no more display output
GV-NX84S256HE rev 1.0 - displaying green artifacts
GV-84G256HE rev 2.0 - just dead
GV-NX84G256H rev 2.0 - dead
I will post some pictures later when I get hands on the camera.
Also all listed cards have passive cooling so they overheat all day so this might be a problem here.Last edited by Audison; 09-27-2016, 10:54 AM.Leave a comment:
-
Re: philips 170s turns on for 1s and than dead
Correction power led stays powered on just the back-light dies. Sorry for confusion....Leave a comment:
-
Re: ATI 4670 dead
Great information momaka! Thank you very much! I will try doing reflow on a few dead cards I have lying around first and than try to fix this one.Last edited by Audison; 09-27-2016, 07:28 AM.Leave a comment:
-
Re: ATI 4670 dead
Thanks for information. Any advice on doing the reflow? can you do it in the oven at what temps and for how long? Thanks!...Leave a comment:
-
Re: philips 170s turns on for 1s and than dead
How do you even edit thread title on this forum? Looked everywhere and I can't find the option to do it. The title is misleading now that we know that the back-light is the problem and it does not power completely down. What is interesting is that the power led goes off at the same time...Leave a comment:
-
Re: I broke my creative sound blaster wireless transmitter
clear images from back and front of the disassembled transmitter would be really helpful....Leave a comment:
-
Re: philips 170s turns on for 1s and than dead
budm any advice? we still trying to fix this monitor... let us know what needs to be replaced to get this monitor working again. ThanksLeave a comment:
-
Re: Gahhh why do i keep seeing 'DNS server not responding'
I had problems for a few days with badcaps loading very slowly. Don't know if it's related to your problem I am from Europe... btw it's working fine now...Last edited by Audison; 09-20-2016, 06:27 AM.Leave a comment:
No activity results to display
Leave a comment: