Re: ASUS TP500L No backlight
Actually are you referring to the black component with a hole in it or the brown one?...
spivey76
New Member
Last Activity: 08-24-2017, 01:45 PM
Joined: 08-22-2017
Location: SEVA
-
Re: ASUS TP500L No backlight
Just any SMD LED to bridge the connection? Can I just bridge it with solder?...Leave a comment:
-
Re: ASUS TP500L No backlight
So can I assume its a fuse then? When I measure it I don't get an open like a traditional failed fuse, but the meter also jumps around and never settles on a small range ( I don't have a small set of probes either, just standard size).Leave a comment:
-
Re: ASUS TP500L No backlight
That's what I was hoping to see, but (as in the picture) it isn't labeled. Or is it and I'm missing it? That is a resistor correct? So I can't just bridge it to test?I've also attached a shot of the opposite side of the mother board, the parts in question are directly below the video connector....Leave a comment:
-
ASUS TP500L No backlight
I was replacing the glass LCD on a ASUS TP500 when the backlight went. I can still see a faint image by shining a flashlight on the screen and the HDMI works for mirroring the display. While looking at the mother board I found what's in the picture. Is this a fuse or resistor? I get fluctuating numbers when I measure it which is why I'm not sure.
Also does anyone know where any other fuses are located on this board? Model number on the board says TP500LN Rev 2.0.... -
Re: New Members - please post your introductions here
Hello. Never thought I'd get into component level electronics again but here I am looking for information for surface mounted fuses on mother boards.Leave a comment:
No activity results to display
Leave a comment: