Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Lenovo Yoga 330 11IGM YOGA330_MB_V06 Schematic
Lenovo Yoga 330 11IGM YOGA330_MB_V06 Schematic...1 PhotoLast edited by Vesko356; 01-03-2024, 02:17 AM.
-
Lenovo Yoga 330 11IGM YOGA330_MB_V06 Blown Voltage Reg V3P3A and ENE KBD Controller
This is a Data Recovery case from Lenovo Yoga 330 11IGM onboard eMMC Sandisk 128GB
[ATTACH=JSON]{"data-align":"none","data-size":"full","data-tempid":"temp_323029_1704189688017_658"}[/ATTACH]
Seems like the device had a power surge. Blown U6002 and went and cracked the die of the KBD controller. I detached the JP6003/4 tracks around U6002 but short still appears around the kbd controller (i believe)
[ATTACH=JSON]{"data-align":"none","data-size":"full","data-tempid":"temp_323030_1704189700334_276","title":"thumb_323026.jpg"}[/ATTACH]...4 PhotosLast edited by ZixuTech; 01-02-2024, 04:01 AM.
-
Thinkpad X13 Gen 3 Not Charging via Thunderbolt - need SPI bios
Thinkpad X13 Gen 3 Not Charging via Thunderbolt seemingly after an update. Ran out of battery and stays at 5V Fan spins for a second when it switches on, but then power button blinks 2 times and goes off
What I have tried
- I managed to extract a TBT.bin from Gen 1 version, but I don't think its compatible, as its not even moving to 20V as before, but stays at 5V only - [url]https://support.lenovo.com/au/en/downloads/ds553979-thunderbolt-firmware-update-utility-for-windows-10-version-1709-or-later-thinkpad-x13-gen-1-t14s-gen-1[/url]
- Padded with FF until end to fill 16MB...Last edited by ZixuTech; 10-12-2023, 11:27 PM.
-
Re: Turns on and shuts off NUC8I7HNK4 needed a BIOS
Anybody who can fix this bios for me? Quite desperate here. I am sure its bios problem, but cant fig any dumps.
Leave a comment:
-
Re: Turns on and shuts off NUC8I7HNK4 needed a BIOS
Anybody to assist with this?
Leave a comment:
-
Turns on and shuts off NUC8I7HNK4 needed a BIOS
Seems like we are dealing with a case of a corrupted BIOS after Intel Driver software attempted to flash the bios (haven't seen that before). The customer reported seeing a BIOS message while the screen was flickering during the Intel Display Driver installation. This was while the BIOS WRITE lock jumper was in place. Resulting in Loop restarting.
Afterwards, the customer attempted flashing BIOS via USB stick, resulting now in turning and immediately shutting down unit NUC8I7HNK4.
Under the thermal cam, I can see that the CPU is initiating a heat signature for a second...
-
Re: Imac 27" a1419 emc 2546 bios bin
Thanks, ill test and report back
Leave a comment:
-
Re: Imac 27" a1419 emc 2546 bios bin
Can somebody remove my password from this bin please?
I have tried all bin in the posts but all turns on with black screen....
Leave a comment:
-
Re: Imac 27" a1419 emc 2546 bios bin
With this BIOS I get
A1419 2012 27" iMac comes with MX25L6406E with size of 8388608
While the bin is 8388672...
Leave a comment:
-
Re: Lenovo ThinkPad E14 Bios
This worked on mine,Do i need to flash anything from my dump into it to ensure SN and Win License is intact?...
Leave a comment:
-
Re: IdeaPad 3 14ADA5/15ADA05/17ADA05 Lenovo V14-ADA/V15-ADA Bios
Thanks for this. I have flashed it, seemed to load up with missing SN and windows key. But then every other time it will load with blackscreen and no response from keyboard. Sometimes will start with Fans spinning other times with no fans just black screen.
Power button flashing seems to happen when the battery is not connected only now.
Leave a comment:
-
Blinking Power Button on Lenovo IdeaPad 3 15ADA05 GS450/GS550&GS750 NM-C821 Rev 1.0
Completely lost here. Have this Lenovo GS450/GS550&GS750 NM-C821 Rev 1.0, which turns on sometimes and works ok, and I can go to bios, although the power button is flashing.
Other times it will just won't pull any current above 0.01A from the PSU, ON LED is lit up and the power button flashing.
I have tried to flash this bios via SPI [url]https://www.badcaps.net/forum/showthread.php?t=95104&highlight=GS550[/url] it fired up and informed that needs to reser...Last edited by ZixuTech; 02-08-2023, 03:59 AM.
Leave a comment:
-
Re: Razer Blade RZ09-01953 Switches off under Nvidia GPU load
Yeah thought the same, hence went and UCd the whole board to make sure nothing conductive is left.
@Sephir0th, I feed it with 15A Bench PSU pulls 4A at max.Temps are in the 60*s range. When I fire up Heaven its stable on the loading part, but cuts off the minute game starts.
I went and reflowed the GPU, to eliminate cold joint. But still same. Maybe RAM chips next - seems to be common thing with Desktop GPUs. But cant run MATS to confirm....
Leave a comment:
No activity results to display
Show More
Leave a comment: