Re: RT809H Universal Programmer
Oh sorry i believe you need RT809H 2021, you can download from here
[url]http://www.mediafire.com/file/69ihs5gbk9d1x2h/RT809H_20210101_ENG.zip/file[/url]Re: RT809H Universal Programmer<br /...zip/file[/url]
shani
Member
Last Activity: 09-28-2024, 05:26 AM
Joined: 11-29-2017
Location: Lancashire
-
Last edited by shani; 02-26-2021, 10:00 AM. -
Re: RT809H Programmer Not Detecting Any Chip
Thanks for your reply, I will try with different cable. I bought this from HKLRF.com but used only once. after two year i try to use it and it's showing these random errors. Anyway i can't really return this product so i will open it and see if any dry solder problem with this programmer as you mention. Thanks again for your help
...
Leave a comment:
-
RT809H Programmer Not Detecting Any Chip
Hi guys
My RT809H is not detecting any chip. Whenever i try to detect any chip it's keep showing me messages.
Chip pins is detected poor contact, operation has been terminated.
chipPin: 6-30-24
Chip ID identified error, the chip not well placed or has been damage.
No matter which chip i use or which adapter i use it's keep giving me random messages and random errors.
If you look at the picture 1 and 2 same thing happen here is well. random errors here is well.
when i bought new i used only once and even then... -
Re: RT809H Universal Programmer
Try this link RT809F_20210101_ENG
[url]http://www.mediafire.com/file/fcixvj8fom0wciq/RT809F_20210101_ENG.7z/file[/url]Re: RT809H Universal Programmer<br /....7z/file[/url]...Last edited by shani; 02-16-2021, 01:07 PM.Leave a comment:
-
Re: Imac 2017 efi password
Hi Is this clean bios file, without password?...Leave a comment:
-
Re: Samsung tv no backlight
Hi guys, I am having same problem, I managed to change the two leds on strip, I tested the led strip with led tester and all the led worked fine until i have connected with tv led connector and plug in the tv.... I hard the pop and same led blow up again .
Tv comes on and i can see the picture with torch light but leds keep blowing up
I have voltage only on 1 - D+ and 2 D+, When i switch the tv on voltage goes up to 221 the comes down to 218 on these two connections. I have no voltages on other pins....Last edited by shani; 09-09-2018, 12:00 PM.Leave a comment:
-
Re: Samsung PS51E450 Plasma Problem.
Hi Guys
I am having a same problem with my Samsung Ps52E450 , All the voltages are Ok on Ysus Power supply and Xsus board. Logic board light is flashing every second. Back light and audio is also working but no picture. I think it might be a main board. i don't know how to test the main board. can someone plz help me with this. Thank you.Leave a comment:
No activity results to display
Leave a comment: