Re: Panasonic P60ST60 7 Blinks
Just wanted to update this thread to state that it indeed was the SS board. She fired up without issue. One other issue cropped up though, had a horizontal black line along the bottom 1/4 of the TV. Reseated the cables on the SD Board, made it worse... reseated again. All went away. Those things really are touchy.
Anyway, thanks for all the help guys! Total cost was $100 CAD for the TV and $70 for the new SS board after shipping and exchange.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Panasonic P60ST60 7 Blinks
Appreciate the help. I found a ss board for cheap. So I decided to order that. Crossing my fingers, hopefully I will have a 60 Inch ST60 for under $200 CAD. ...
Leave a comment:
-
Re: Panasonic P60ST60 7 Blinks
Just tested those now. The heatsink directly above the pictured mosfets. The Q'd Mosfets on the left side appeared to be fine. The D'd Mosfets on the right had continuity (Which I assume it what I want).
However the two Q'd mosfets underneath the far right heatsink both had continuity (Which I assume is what I don't want).
Photo Attached.
[URL="https://photos.app.goo.gl/aplnVaMKmjCyXd6n1"]https://photos.app.goo.gl/aplnVaMKmjCyXd6n1[/URL]
The far heatsink...
Leave a comment:
-
Re: Panasonic P60ST60 7 Blinks
Sure thing! Thanks for the continued help!
I have no idea why my images aren't being displayed here...
Anyway, here are the photos.
[URL="https://photos.app.goo.gl/WN2J2XVTi4AULIGk1"]https://photos.app.goo.gl/WN2J2XVTi4AULIGk1[/URL]
[URL="https://photos.app.goo.gl/NfXrCkf0EyiugbXv1"]https://photos.app.goo.gl/NfXrCkf0EyiugbXv1[/URL]Re: Panasonic P60ST60 7 Blinks
Sure thing! Thanks for the continued help!
I have no idea why my images aren't being displayedLast edited by Daeyx; 01-02-2018, 02:13 PM.
Leave a comment:
-
Re: Panasonic P60ST60 7 Blinks
That is correct, I tested the mosfets with the Q numbers and tested all 3 pins. 3 of the mosfets showed continuity and 2 of them didn't.
Leave a comment:
-
Re: Panasonic P60ST60 7 Blinks
Hi Tvtimmy. So I tested the the mosfets. 3 out of the 5 that I tested had continuity, so I am guessing those are bad?
The SS11 connector also came back beeping too.
Leave a comment:
-
Re: Panasonic P60ST60 7 Blinks
Thanks, I will look into doing this.
I did test the SS62 connection as per the Panasonic manual for continuity and it did come back with an error when testing pins 1 & 2. Does that mean anything?...
Leave a comment:
-
Re: Panasonic P60ST60 7 Blinks
What is the proper way to test the mosfets on the ss board using a DMM? Do I have to worry about damage using the tester for touching the wrong parts? Sorry for the questions, still new and want to be sure....
Leave a comment:
-
Re: Panasonic P60ST60 7 Blinks
Does anyone have a link for the ST60 flow chart? The SS board is different on this model compared to the ST50.
Leave a comment:
-
Re: Panasonic P60ST60 7 Blinks
I tested the originals last night. Neither one had any shorts, I will test the replacements.
Leave a comment:
-
Re: Panasonic P60ST60 7 Blinks
I saw an SS board on shop jimmy for $39, might be better to just buy a new one at this point I guess. But I will test the mosfets.
Leave a comment:
-
Panasonic P60ST60 7 Blinks
Hey guys, so I bought a 60 Inch ST60 from a guy yesterday for $100 that had the 7 blinking lights. He had already replaced the the SC, SU and SD boards, but still had the 7 blinking lights, so he decided to cut his losses. I decided to take a crack at it and followed a flow chart for a ST50 (I assume these TVs are nearly identical for troubleshooting). I disconnected the SS11 cable and got 8 blinks. Can I assume that the SS board is the culprit here? Anything else I need to verify or test before ordering a replacement?
Thanks for the help!
Oh and Happy New Year!Last edited by Daeyx; 01-01-2018, 10:30 AM.
-
Re: New Members - please post your introductions here
Hi there, names Garth. Looking at getting some advice for a TV repair on a plasma that i am working on.
Leave a comment:
No activity results to display
Show More
Leave a comment: