Re: Samsung UN55D7000 translucent horizontal flickering bar?
@Martino - good thought - I didn't think about them wiring them together. If they did that could point to a bad board. @BudM - I'll try to get my bench cleared or worst case use a bed or folding table so I can disassemble and take a look shortly - probably be Friday before I have a chance.
Thanks to you guys for sharing your knowledge and helping me sort this! You rock!
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Samsung UN55D7000 translucent horizontal flickering bar?
Thanks for that martino. If I am understanding this TV's design - it's edge lit. And since the dark is on both sides equally, am I correct that I would need to replace both backlight strips? Is it common for both to go out in the exact same section at the exact same time?
Leave a comment:
-
Re: Samsung UN55D7000 translucent horizontal flickering bar?
Edges are not well defined - kinda hazy - Pics below
[url]https://drive.google.com/open?id=1CEGr_EY0MP5NQJyAU97H8GcH9-AKu1Nc[/url]
[url]https://drive.google.com/open?id=1-wvJ1FaA4WsdbHjNbiKaupUnxfFoKWVp[/url]Re: Samsung UN55D7000 translucent ho...?id=1-wvJ1FaA4
Leave a comment:
-
Re: Samsung UN55D7000 translucent horizontal flickering bar?
OK - so - I got home - and went into the service menu, ran the Genoa-P test pattern, when I got to the solid white pattern...the bar was evident for about 1 second, then when away. Screen looked perfect! I continued through all the patterns in Genoa-P and Napoli - the bar never came back. I did a factory reset anyway, tv looked great. Powered it off and on a few times - no issue! Came back a few hours later, bar was there when I first turned it on, then went away after a few seconds. NATURALLY it was there when I didn't...
Leave a comment:
-
Samsung UN55D7000 translucent horizontal flickering bar?
Good morning! I have a samsung un55d7000 that has developed a flickering grey semitransparent bar across the middle of the screen - about 4" - 5" tall. It "flickers" like a florescent light trying to start (I know there are no florescent in it...only thing I could compare it to). The image still displays through it / moves behind it. Is this a Panel, backlight, or board issue? Fingers crossed its something OTHER than the panel failing.... I haven't had a chance to pull it apart yet -we just moved into our new house and my workbench is still a massive drop zone of crap....
No activity results to display
Show More
Leave a comment: