Re: Sharp LC-60EQ10U no display code 3-1

Here is the labeling and pin location....

Re: Sharp LC-60EQ10U no display code 3-1

I went to test the board and I am having trouble determining which pin is what. As the pins dont seem to be in any specific order counting them (maybe I'm just overlooking something). I have located the PS ON pin, and it reads 5 volts. I am unable to figure out which pin to jump it too though. As the video lists it as 5VSB, and I do not have that pin. If someone could guide me on which pin to jumper it to, and how the pins are counted itd be much appreciated. I will attach pictures of the labeling. And which pin is the PS ON.

Re: Sharp LC-60EQ10U no display code 3-1

Yeah I watched that video. Is the power board the only cause of this code? I plan to test the new power board asap and see if it's doing what it's supposed to. Just curious what the other issue(s) could be.

I have a Sharp LC-60EQ10U that does not turn on. Minutes after plugging it in. The power light blinks 3 slow and 1 fast. I have replaced the power board, and still the same issue. Anything I'm missing or do I need to replace the main board? I'm not too tech savvy, just looked like a pretty basic fix. Any help is appreciated.

Re: New Members - please post your introductions here

Atlanta
Sharp LC-60EQ10U
Not very technical savvy, but manage to fix things on occasion.