Re: Samsung PS51e6500 plasma tv, bang then no picuture
When the tv is on and I can hear sound, the vs and va voltages still don't show up as they should as per the sticker
How do I do a self test mate?...
bm_999
Member
Last Activity: 06-17-2018, 02:48 PM
Joined: 05-20-2018
Location: Hounslow
-
Re: Samsung PS51e6500 plasma tv, bang then no picuture
Ok people, update on this.
Ordered a new Y sus, exactly the same as my old 1 including the AA2 version number, no short on this when testing.
Turn the tv on and this time the standby light doesnt flash red every second, BUTT no picture only sound when i connect via hdmi to my sky box
Could the buffers be damaged?Leave a comment:
-
Re: Samsung PS51e6500 plasma tv, bang then no picuture
No short after i disconnect the cable going from xsus to y sus
Even if i disconnect y sus from y buffer the short is still there only when i disconnect the y sus short clears from vs to anywhere on chasis of tv on loop or resistance on meter...Leave a comment:
-
Re: Samsung PS51e6500 plasma tv, bang then no picuture
so when there is a short and i disconnect the ribbon going to the y sus (but keep the wire from the power to the right hand buffer) the short clears
Also if i disconnect the y sus from the buffer next to it (on the left hand side) the short is still there but again if i disconnect the cable going to y sus short clears.
This is on both y sus my old 1 and new 1
so have i been sent out a dodgy y sus?Leave a comment:
-
Re: Samsung PS51e6500 plasma tv, bang then no picuture
ok mate, so ground to va nothing, but ground to vs there is a short. when i disconnect the cable going to the right hand buffer which then has another ribbon on the top going to the y sus the short stops, is that a buffer prob or ysus or something else lol
appreciate the help mate...Leave a comment:
-
Re: Samsung PS51e6500 plasma tv, bang then no picuture
yes mate that to, noticed after i put the post up, no all the screws were in before i turned it on
im just wondering why there is not voltage on the vs and va still, shouldnt there be something?...Leave a comment:
-
Re: Samsung PS51e6500 plasma tv, bang then no picuture
ok people, i ordered a y sus board, got it this morning put it in but again nothing just the red led flashing twice than 1 sec pause then twice again
1 thing i noticed when turining tv on there was a whiring or buzzing sound from new board but then that went away.
Also still getting no power on va or vs terminals
And there is a slight difference between my board and the new one but it might not matter, plz see pics attached
Also any idea what to do next plz ppl?...Leave a comment:
-
Re: Samsung PS51e6500 plasma tv, bang then no picuture
thanks rj, have just double checked and that cap is shorting out, have checked others aswell and they are fine so thats 1 thing.
Never knew that without a load going out the vs and va would not work or power up, so it seems like either changing the cap or just get a new y sus board??...Leave a comment:
-
Re: Samsung PS51e6500 plasma tv, bang then no picuture
Cheers mate but you might need to dumb it down for me loll.
In regatds to the pwoer board and the vs and va voltages i have checked this with both ribbon cable discinnevted from that power board so nothing other than that power board is being checked so to speak
What legends do you mean mate on the vs and va board? There are a lot
Also that blue thing in the 3rd pic is that a capacitor? If that has blown on the y sus board then can that cause the power board...Leave a comment:
-
Re: Samsung PS51e6500 plasma tv, bang then no picuture
Hi there people, please the attached pics
The 2nd pic shows the vs and va terminals that when checked with my meter shows nothing, both with other boards connected to the power and without
The 3rd pic shows the only component that could be burnt out on the far left board I think the y sus. So could it be both he power and y sus boards I need to order??...Leave a comment:
-
Samsung PS51e6500 plasma tv, bang then no picuture
Hi there people, so my Tv is about 7 months outside of its 5 year warranty (originally from john lewis).
Apprantly the tv was on and then the noise came and tv went blank, family tried to turn it on but nothing just the red led flashing.
Now as there is o warranrty left and me being me i dont want to part with it yet i opened it up and had a lool.
I think there is a blue component on a rectangle board on the left side (think the y sus board).
But i have checked the power board and with the negative from meter going on the tv chasis /... -
Re: New Members - please post your introductions here
hi all, found this when searching for some help for my samsung ps51e6500 plasma tv, from the uk and hopefully will use this more in the future and contribute as much as i canLeave a comment:
No activity results to display
Leave a comment: