flc1988
Member
Last Activity: 08-08-2024, 06:24 PM
Joined: 11-01-2018
Location: Caxias do Sul
-
HP Z620 PSU shutting down S10-800P1A
HP Z620 PSU shutting down S10-800P1A. i've replace CP2104 and still sutting down. Any ideia ? -
asus x510u accelerating fan and after a few minutes it turns off even in bios
asus x510u accelerating fan and after a few minutes it turns off even in bios.
i've tested only motherboard without battery, keyboard, replaced fan, disabled discrete graphics, replaced memories and still shutting down. I am using last bios. -
Re: HP 840 G1 battery and charging issues
Two batteries were bought, the first one didn't know and the customer returned it. The second was also not recognized. I quickly checked the pins and they are clean. On Wednesday the client will bring it to me again. The charger is HP original 90w. -
HP 840 G1 battery and charging issues
HP 840 g1 - new battery - when inserted, it turns on normally from the battery and when inserting the charger it starts to use energy from the charger. The battery is not recognized (%), but when removing the charger the notebook continues to use battery power. The laptop does not charge the battery.
there is a message: "warning - machine is not commit state" -
Re: Sony mbx-247 need to remove battery to turn on (sometimes not)
About this ?...Leave a comment:
-
Re: Sony mbx-247 need to remove battery to turn on (sometimes not)
Gate to earth - 18.75v
drain to earth - 0.17mv
source to earth - 18.80vLeave a comment:
-
Re: Sony mbx-247 need to remove battery to turn on (sometimes not)
Tanks for help-me. See the schematic....Leave a comment:
-
Re: dell 15-5557
See attached...Leave a comment:
-
Sony mbx-247 need to remove battery to turn on (sometimes not)
Hi, i have a Sony vpceh-30eb. Battery original looks good. Original charger Sometimes, when pressing the power button, the notebook does not light up any led. but if you remove the battery it turns on normally. Sometimes it runs on battery power. -
Re: New Members - please post your introductions here
Hi, I'm FabrÃcio. I'm 35y. I work with industrial pc repairs and some electronics equipaments. Since 2009.Leave a comment:
No activity results to display
Leave a comment: