Thanks for your reply,
unfortunately the boardview 820-00239-A is different from the motherboard 820-00239-09
I've already been able to compare these differences in use, which are sufficiently important to search for a completely suitable file.
I'm trying to repair a very damaged motherboard.
caribert
Member
Last Activity: 08-29-2024, 09:13 AM
Joined: 07-19-2021
Location: Orne
-
boardview and pdf files for A1706 motherboard 820-00239-09
Hello everyone,
I'm looking for boardview and pdf files for A1706 motherboard 820-00239-09
Despite my efforts I have not found anything available.
The motherboard is very different from 820-00239
Thanks in advance to anyone who can help me. -
Re: Thermal camera IRepair RC 10 does not work.
It is possible that some partial data are still accessible, we will see at that time. I need to understand the architecture of the data storage and this will be done only when I have found a NXP LPC43S30FET100 micro controller or a Mosaic Core module in the scrap, which is a very very difficult task....Leave a comment:
-
Re: Thermal camera IRepair RC 10 does not work.
I will continue to look for this microcontroller ( NXP LPC43S30FET100 ), it's the only way to save this camera....Leave a comment:
-
Re: Thermal camera IRepair RC 10 does not work.
The crack is very difficult to see, I have passed it many times under the microscope without seeing it.
If you touch it with an instrument the corner moves.
The normal spectrum camera works and is visible with the application provided [URL="http://irepairbox.com/xzzx"]here[/URL]Re: Thermal camera IRepair RC 10 does not work.
The crack is very difficult to see, I have passed it many times under the microscope without seeing it.
If you touch it with...Last edited by caribert; 11-21-2021, 08:47 AM.Leave a comment:
-
Re: Thermal camera IRepair RC 10 does not work.
Thanks for the link.
It is indeed more coherent....Leave a comment:
-
Re: Thermal camera IRepair RC 10 does not work.
Thank you for this answer
Indeed the GL850G hub can be used without EEPROM, and this is the case for this camera, EEPROM that does not exist.
Most likely C06AB is a voltage regulator, 2.8V or 3.3V.
Some time ago and by awareness I had changed the component GL850G and the capacitor 100uF 16V, but without effect.
The manufacturer of the camera has integrated an infrared camera from SeekThermal and another normal spectrum camera by managing both video streams, on a USB output....Leave a comment:
-
Re: Thermal camera IRepair RC 10 does not work.
I had put aside the fault finding, for having already spent too much time on it. By approaching the research differently I focused only on the thermal spectrum camera, indeed I thought at first that the management of the two flows was managed downstream but it is not the case. Detecting a short circuit of very low intensity I focused on the chip covered by a sticker and thermal paste and in grazing light I discovered a crack that turns out to be a fracture.
It is a microcontroller based on the Cortex-M4 of Arm, NXP LPC43S30FET100...Leave a comment:
-
Re: Thermal camera IRepair RC 10 does not work.
I am happy for you that this is how it is for you, but in my case it was different. After information the cost of the reshipment was 190 dollars. I thought that this camera had cost me a lot of money, especially since I had no guarantee that an exchange would be better, given the lack of interest of the seller for an expensive and defective product....Leave a comment:
-
Re: Thermal camera IRepair RC 10 does not work.
I have unfortunately validated the reception, despite a dispute from this reception for sending an expensive package without any protection. But in fact you should not validate the reception until you are sure that the product works properly.
I asked for a refund which was refused.
For the driver, the address above is the right one, it is on the head of the camera, IREPAIR RC10 and visible on the photos.
I could not read the message in PM...Last edited by caribert; 09-27-2021, 02:48 AM.Leave a comment:
-
One other note EBay is the easiest to deal with when you have an issue with a device the other two websites are a lot more difficult to deal with -
This also leaving feedback does the same exact thing it says that it works correctly -
One note if you used PayPal on AliExpress you can file a complaint PayPal and maybe get your money back -
No matter how much money you spend on any of these websites I will not say that I received it this is what I do
Only once that I got some what burned from buying something on AliExpress and once on Banggood website site as well -
If you buy any item from AliExpress that is over $100.00 do not say that you received the item until you have completely tested it and it works correctly
I personally do this on all electronic devices that I buy from them especially because if you say that you received it you are also saying that it works correctly
I also do this on EBay as well
I hope that you can get this device working correctly -
Re: Thermal camera IRepair RC 10 does not work.
Thank you for this answer.
[url]http://www.genesyslogic.com/en/product_view.php?show=21[/url]
[url]http://www.genesyslogic.com/en/product_list.php?1st=2[/url]
Here is the datasheet of the hub, I have studied it from top to bottom.
[url]https://pdf1.alldatasheet.com/datasheet-pdf/view/207042/GENESYS/GL850G.html[/url]
For the driver here is the download site, no DVD provided. Site in http ???
[url]http://irepairbox.com/xzzx[/url]
[url]https://www.fanscreate.com/products/...hermal-imaging[/url]...Last edited by caribert; 09-26-2021, 09:50 AM.Leave a comment:
-
Re: Thermal camera IRepair RC 10 does not work.
Thank you for this answer.
Yes, I have tried all the installation options, including disabling the signed driver. But without result.
[URL="https://www.youtube.com/watch?v=d-ycDOYKcgg"]Here is a video of some [/URL]of the tricks used to force the installation of the driver.
I managed to install the driver by modifying the VID:PROD of the SeekWare.inf file by deceiving the installer with the vid-prod of the hub and apparently an unidentified device but probably the visible spectrum camera. But of course...Leave a comment:
-
Thermal camera IRepair RC 10 does not work.
Hello everyone,
I bought from aliexpress a thermal camera IRepair RC 10 and it does not work.
Under Windows 10 it is impossible to install the driver. Under Linux s VID:PID defined in the driver SeekWare.inf is unknown, but we get the name of the devices, visible spectrum camera, infrared spectrum camera.
A hardware problem is most likely.
In the datasheet of GL850G from Genesys logic ( HUB - Universal Serial Bus. ) it says QFN28/SSOP28 only supports 24C02.
But instead we have a C06AB chip, datasheet not found.
If you own this camera and have... -
Re: New Members - please post your introductions here
Hello to all,
Ex photographer, I branched out into computing when digital photography arrived and the film industry ended. Although from the beginning of my photographic career I already had a foot in the development of computer applications. I did assembly and repair.
Recently the electronic repair takes a dimension that it had never known and I am interested again, with a lot of passion.
Below is a link to a free application that may interest some of you.
*****************Last edited by SMDFlea; 08-26-2021, 01:08 AM.Leave a comment:
No activity results to display
Leave a comment: