I swapped all working parts from my CX to C1 and other way around. Exactly the same results. CX working with both sets of Tcon and Mainboard and C1 same lines with the running HW from the CX.

now I‘ll to the dirty work ...

So I tried the T-Con from my working CX and unfortunately it creates a similar error with the artifacting lines in the middle.
[url]https://youtu.be/xenV1ih4fDU[/url]

So I guess I‘m going to cut the TV to get to the buffers…https://So I tried the T-Con from my...the buffers…So I tried the T-Con from my working CX and unfortunately it creates a similar error with the artifacting lines in

Alright, I‘ll do so.

I also own another TV: CX running on an C1 mainboard

But I assume because T-Con and Panel are married It won‘t work swapping the CX-T-Con with the C1 one?

Alright, I did like you described. Uploaded a short clip on youtube. [url]https://youtu.be/NooYblfm0JQ[/url]https://Alright, I did like you desc...Yblfm0JQ[/url]

Hello guys,

I recently picked up an LG C1 in 65 inch size. Previous owner told me that the TV won‘t start, so I did believe due to PSU issue, but not this time. I could narrow it down to the T-Con or Panel.

PSU and Mainboard work both like intended, all Voltages available, Optical on when T-Con lower Ribbon is disconnected and I even managed to get some picture with P-Only, IN-STOP cycle but only for 2 sec. before shutdown.

For the stand alone test the panel starts with some flashing horizontal white lines and then continues to build up some color on the...

Hallo my name is Theo and I‘m an electrical engineer from germany. Started reparing 3 years ago and my favorite device to repair are TV‘s.