Re: ASUS GTX 1660 Missing Components

That's great, thanks!

Re: ASUS GTX 1660 Missing Components

That picture is perfect thanks. Looks like there were a few more knocked off that I couldn't tell from the solder.


If you have the schematic for this board that would be great. I just need to identify those 5 pin chips and the values of the caps and resistors.

I'm trying to repair an ASUS GTX 1660 Pheonix that appears to have had components knocked off in shipping.
Can't find a good enough image on the internet to compare to. I have a boardview of a completely different 1660 that isn't really helping.

It's currently getting only 12V on the test points on the back.
I'm assuming these components are the checks to power up the next rail.



[URL="https://i.imgur.com/Z9nWl3Q.jpg"]Plain image[/URL]I'm trying to repair an ASUS GTX 1660 Pheonix that appears to have had components knocked off...

Not sure where to go next with this card.

It crashes out instantly, or after about 3 frames of any graphical program. Even OCCT tests end themselves after 10 seconds as if I'd pressed stop. Once it reported 619000 errors but it's only done that once, normally I'm not getting any indications of what is causing the issue.

Stuff that I've done so far:

I repaired this damaged EVGA GTX 1080 blower style card. It had some components knocked off the back which I replaced. Q522, R618, and the 0 ohm resistor next to them.

Powered it up and found...

Re: New Members - please post your introductions here

Just making the standard introduction post