Re: samsung un50tu8000 and un70yu7000 displays shorted
I have the same problem on my Samsung qled tv. Sorry to hijack the thread but can you please tell me how to test diodes ?
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Samsung QE55Q700T
I've unplugged the upper backlights and it's stopped rebooting on another set
. The backlights are all working but can one be shorting causing this
Leave a comment:
-
Re: Samsung QE55Q700T
Has anyone any information on removing the backlight panel on this model as the display is part of the frame and either the panel needs to be removed from frame or the backlight panel unclips from the rear leaving the panel on the frame . Not sure how to go about it ?
Leave a comment:
-
Re: Samsung QE55Q700T
Need to try a factory reset but someone has set a code and don't know it
Leave a comment:
-
-
Re: Samsung QE55Q700T
Be good if can get schematics. Also does anyone know the remote sequence to get to the service menu please ?
Leave a comment:
-
Re: Samsung QE55Q700T
Thanks for the help but not sure if needed now . Did the tape method and narrowed it down to the right hand connector and at the moment very slight temporary line in screen so need to look a bit further into it ....
Leave a comment:
-
-
Re: Samsung QE55Q700T
[url]https://uk.rs-online.com/web/p/tvs-diodes/8270437[/url]Re: Samsung QE55Q700T<br /> <br /> .../8270437[/url]
Leave a comment:
-
Re: Samsung QE55Q700T
D1213A-04SO-7 rs components say this is the alternative as DT1042-04SO-7 is discontinued?
Leave a comment:
-
Re: Samsung QE55Q700T
Wow , really hard to find any in the u.k.?
Leave a comment:
-
-
-
Samsung QE55Q700T
Can anyone identify these diodes on the buffer board and tell me where I can get replacements , also has anyone got a service manual for this tv as can't find one anywhere.
What sequence on the remote works for the service menu ?
The tv reboots when been switched on for a while and want to check these diodes out as they seem to be a problem as I've read up on here .
Tried 4xpsu,t-con,led and mainboards and seems to stop happening when I disconnect any ribbon cable from t-con to buffer boards.
Display has no lines or defects from what I can see .
Any advice...
No activity results to display
Show More
Leave a comment: