Re: Iphone 5 Bad Microphone
Due to moisture or water contact maybe.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
-
Re: toshiba L510 laptop no display
It's your ATI GPU. Do a reflow and then check. If it does, reball that chip.
Leave a comment:
-
Re: Pavilion dv9000
Need to clear some doubts here. Not heard much of relfowing the Southbridge. However, if there are problems associated with southbridge, are you saying that reflowing the southbridge will clear all those problems?...
Leave a comment:
-
Re: is it a faulty nec/tocin ?
Thank you for the correction, Sire....
Leave a comment:
-
Re: is it a faulty nec/tocin ?
IMO, the NEC/TOKIN caps were responsible for issues like 'Not powering on when charger plugged in' and stuff like that. Hanging up on with corrupt screen graphics is some issue that can be related with ram related. Try swapping your ram.
Leave a comment:
-
Re: HP Envy 15 cannot charge battery!
Sorry my solution dint work for you. I am really confused by your last post.
Leave a comment:
-
Re: HP Envy 15 cannot charge battery!
And by the way, have you been able to locate an ISL ic on the other side of the board? And if time allows please post a picture of the other side of the board.
Leave a comment:
-
Re: HP Envy 15 cannot charge battery!
[ATTACH]56533[/ATTACH]
Hello graham. I had repaired an envy 15 about 3-4 months ago. It has the same issue as you say. Sometimes it would charge and sometimes it wouldnt. It would boot with the charger plugged in and still not charge the battery.
So I went to the BIOS screen and hit 'default settings'. Still the same thing.
I tried reflowing some of the mosfets located near the battery charging pin. Still no luck. After trying various sorts of repair attempts I took a soldering tool and flux and re-soldered...
Leave a comment:
-
Re: ASUS u31sd LAPTOP WILL NOT TURN ON
Damn, do you get a fishy smell?
Leave a comment:
-
-
Re: HP Dv6800 Southbridge reflow /Optical Drive detection
Safe temperatures for reflowing would be around 220-240 degrees Celsius. I used my multimeter's temperature probe to measure the temps. Note that the temperature must be increased at a slow rate and not all of a sudden. Maintain 220 for about 3-4 minutes.
Leave a comment:
-
Re: PS3 teardown
Owing to a larger surface area, I guess it is the right amount.
Leave a comment:
-
PS3 teardown
https://[url]http://nishantpinto.blo...e? YLOD maybe?[url]http://nishantpinto.blogspot.in/2013/01/ps3-teardown.html[/url]
I found NEC/Tokin capacitors on the board. Would they cause failure in the future? YLOD maybe?
-
Re: acer aspire 5570 display problem
If it were the GPU, there would be no display at all, be it external or your laptop screen.
1> Could be the LCD CABLE
2> LCD Inverter
3> or the board....
Leave a comment:
No activity results to display
Show More
Leave a comment: