Re: view sonic vx2035wm flashing blue power lite dark svreen
Let me think about it but I may just give up on for now. You were very helpfull and I wouldn't have goten this far without your help.
One other thing I noticed that even with the voltages stable I was never able to bring up the menu and when I turn on the monitor without the analog cable connected I get a message on the screen that states no signal analoge cable disconnected then it goes away.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: view sonic vx2035wm flashing blue power lite dark svreen
I wasn't able to get the voltage reading since I have to get them off the bottom of the card and I cann;t get to the test points with the cables connected.
the readings for I801 g to pin 6 is .417m
D810
.214
.909
.214
.909
D812
.220
lnf
.219
inf
I'm not an electronics expert but I would expect to see the same readings on both. I would expect to see inf on the reverse readings so maybe D810 has a problem....
Leave a comment:
-
Re: view sonic vx2035wm flashing blue power lite dark svreen
I found a bad conection at the soder joint of c825 + side and the soder trace to L808. The circuit board trace came loose on the positive side. By moving the cap and using an ohm meter I can make the connection come and go. That positave lead connects to pins 4,5, and 6 of P801. I'm thinking this is my source of fluxuating voltage. Cap 825 is one I replaced and I either messed up the connection on taking the old cap out or installing a new one. I'll repair the trace and I may as well replace the two caps you wanted me...
Leave a comment:
-
Re: view sonic vx2035wm flashing blue power lite dark svreen
I did recieve those two caps but I didn't repace them since they looked ok. I did all the rest of them. I'll replace them and give it another try.
While I was getting the votage readings the votages stablized and I noticed the monitor was working. I pulled the video cable and replaced it and the problem came back. Kind of tells me there is another bad cap.
You have been real helpfull I think we will get this problem fixed, thank you. I'll continue tomorow because I need to pick up a new sodering...
Leave a comment:
-
Re: view sonic vx2035wm flashing blue power lite dark svreen
P101
pin1 0v
pin2 2v-5v
pin3 0v
pin4 0v
pin5 2v-4.95v
pin6 2v-4.95v
pin7 .8v-1.6v
pin8 1.5v-275v
pin9 15.5v
I101 ACT1084 I102 AP117vc
pin1 0v pin 1 1.5v-3.29v
pin2 1.5v-2.29v pin2 .9v-3.29v
pin3 2.9v-4.94v pin3 0v
all readings taken with Fluke digital mutimeter model 77
Leave a comment:
-
view sonic vx2035wm flashing blue power lite dark svreen
The capacitors I removed I could see that there were five that were bad.
However the repair did not fix my problem, before I repaired the monitor it had a dark screen and the blue lite on the front of the monitor would flash. After the repair I got the message on the screen that the analog signal was missing and the blue lite stayed lit. When I installed the monitor cable the same problem with dark screen and flashing blue lite. I am unable to bring up the menu options also. The capacitors did correct some problems because I never got the no signal message before. There is still a problem...
No activity results to display
Show More
Leave a comment: