Bholu
Member
Last Activity: 10-26-2024, 02:49 AM
Joined: 02-21-2024
Location: Riyadh
-
Sorry sir, I did not see it in a hurry. I only intended to show it to e-prom ic.... -
By looking at the position of your display I can say that the e-prom IC installed in this t con does not have the correct software. Please replace the 8 pin e-prom IC with the old t con board. Your problem will be solved.yo
[url]http://televid-sib.ru/index.php?topic=94684.0[/url]https://By looking at the position o...=94684.0[/url]Leave a comment:
-
Haas HK65US311 65" tv
Today I got a 65" TV from Hass company. It was not showing any picture. I taped the 6 lines of the Tcon FFC cable on the faulty side of the shade and the picture came but the display on the side where I blocked the pins was not showing properly. I checked the volts on the VGH point and -3.5 volts was abnormal, there should be about 28 to 30 volts on this point! There were +30 volts on the VGH point on the Tcon. I put a jumper on the source PCB from the Tcon side and saw, the raster started appearing on the display. I also tried soldering the 6 blocked pins but the picture did not come properly....
-
I tried with bluetooth remote but it is not working. The TV LED is blinking red green red green repeatedly. None of the buttons are working....Leave a comment:
-
Sir, from the hint given by you today I came to know that you are talking about literary ADB tool. I typed cmd as type in Python and this window opened. What to do next, sir, please tell me the way, I don't have that much money. I can't do programming courses. I learned a lot with your help. Thank you very much for your time....
Leave a comment:
-
I am not able to understand what you are saying, can you explain it in a little more detail or give me a guide video link which will make it easier to understand...Leave a comment:
-
MTC Mtc4k58s21 58" TV Hk.T.Rt2851P838
Hello friends, I have MTC 58' TV which has stand by position. I thought the software was corrupt. I have downloaded the software from the internet but the data is not matching. The format window is opening from the TV software but none of the buttons on the remote or TV are working. Why? Can I edit this software with a hex editor? Is there any guide to edit this? Or does anyone have access to this software? Thank you very much for your help.
model no.---'[Mtc4k58s21]
panel---D58-M30... -
These are the ckv lins first of all block right side then try left side check it one by one with the help of cello tape....
Leave a comment:
-
hello friend this fault comes with y line shorting u need to locate ckv ckv1 ckvb ckvb2 stvp points they are always go through right and left source pcb to the glass.first cut right side if picture ok then good or picture is not good you need to jumper them and cut other side lines.try this...
Leave a comment:
-
My friend, there is a 8 pin eprome ic attached to this board.rilace it with the new one same nomber remember you do not need to program new ic place the ic as it is. ThxLeave a comment:
-
In the service you need to change the LVDS format from JEIDA to VESA or from VESA to JEIDA.
or change 8bit to 10bit or 10bit to 8bit.
[URL="https://www.badcaps.net/core/filedata/fetch?id=3252486&d=1713067382"]en-US-.pdf[/URL]In the service you need to change the LVDS format from JEIDA to VESA or from VESA to JEIDA.
or change 8bit to 10bit or 10bit to 8bit.
[URL="https://www.badcaps.net/core/filedata/fetch?id=3252486&d=1713067382"]en-US-.pdf[/URL]...Leave a comment:
-
TIT 58 [samsung]
main board---tp.sk708d.pc821
tcon---n4tp580uhdpv6d-f_k1
panel----CC580PV6D_xmx
It is a 58 inch TV made in China by the name TTI, it had a full white screen, I taped U ribbon to block the CKV line. The display comes on with more brightness, the screen is more white, what should I do. Thanks for your support. -
]]
Sir, I had removed these resistances to check them, but it was showing the correct value (100),ohm so I placed it again at the same place. Unfortunately, today I returned the TV to the customer because I thought it was shorting inside the panel. Even the board was not good conditions, I have been searching for this fault on the internet. If anyone has any knowledge then please tell me. my Papa says that knowledge increases by sharing....Leave a comment:
-
I rimove 1 by one all off 2 U ribbuns but no display
I think in this panel bothe gate lains stv vcom ckv ckvb and test points at each source coff r shorted together.
Leave a comment:
-
Samsung 65 UA65AU7000U
I have Samsung (UA65AU7000U.THE RED LED BLINKS SOME TIME AND ONLLY BACKLIGHT ON AND RETURN TO OFF WHEN I RIMOVE FFC CABELE BACKLIGHT GLOW'S ALL THE TIME.SO I THINK IT IS A MATTER OF PANEL(ST6451D03-1-xl-2) but I checked with continuity mode there were no any shgin of shorting or burning.what should I do .thx -
I have a Samsung 65 led tv it seems the main professor is shorted but when I rimove ffc cabele of panel it turn on.it means the main board is ok.i have no shortege on panel capacitors.what should I do thx in advance.Leave a comment:
-
Thank you very much to all of you. I have fixed the TV. Thank you very much for your efforts. There was a problem of Lovds bit map in this TV.i change it 8bit to 10 bitLeave a comment:
-
Leave a comment:
-
i removed the red wire but there is horizontal lines and a blarry screen saver.Leave a comment:
No activity results to display
Leave a comment: