Hi anakin
I'm getting 1.05v on pin 5 of PU501 and the associated inductor. I'm also getting 5v going into PU501. About 3.3V on pin 8 (S_APWROK) but all other outputs expected to be 1.05 seem to be 0.4V.
RAM slots are clean. And i've tried flashing the latest bios using flashback. this seemed to flash successfully.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Asus X99A/USB 3.1 repair
Hi
I recently acquired a second hand X99A that had been previously working but not switched on for a few years.
When booting it gets stuck with error code b6 - cleanup NVRAM, along with the memory light being on.
I've tried removing the CMOS battery and resetting the clock via the jumpers but only once has it ever done anything different than error code b6.
I've tried stripping the board, using different RAM and PSU. I've pressed the MeemOK button to try have default RAM settings. Only thing I haven't tried is an alternative CPU.
...
No activity results to display
Show More
Leave a comment: