AirbusPc
Member
Last Activity: 09-05-2024, 02:14 AM
Joined: 08-06-2024
Location: bogota cundinamarca
-
Hello, how are you? I wanted to update the case of my laptop, I removed the chip from the board and I was about to write it but one of its legs fell off, maybe I removed it incorrectly and damaged it... now my hope is to bring the chips from China, which They arrive in 2 months until then I will be able to repair the equipment I do not see any other possibility I will just tell you how it goes later thank you greetings -
the clip fails....I think the BIOS is damaged I will use a sop8 I must get it I hope that worksLeave a comment:
-
Hello, how are you? I update my case, I remove the bios from the board, I have a clamp but when I use the asprogrammer... I have tried several programs, it shows me the memory is zero or empty and when I try to write, it carries out the process as in 4 minutes but when reading again it is at zero... if you know anything I appreciate your help my bios is w25q64fw 1.8v and I use the adapter and clamp thank you very muchLeave a comment:
-
Ahhaáhh great...Leave a comment:
-
i hope not need another BIOS desolder chip AND do it the process again ...thanks AND sorry for muy bad english...Leave a comment:
-
Hi Eric the software said ... Posible enable protect unlock ... ..
Need another spi BIOS ?...Leave a comment:
-
I don't want to try to remove the integrated one, I use now the as program v 2.10.13 and ch341a led writing works but when I test the laptop it doesn't show anything waiting 4 or 5 minutes after turning onLeave a comment:
-
[RIGHT]
Hello, I have problems reading the bios with the ch341a, the software version 1.38 and version 1.34 showed me an initial reading of 1 minute, all in ff, that is, white, and then it tells me that the chip detection fails, my version is 81fb and the bios is w25q64fw 1.8v I use the voltage adapter ahhh and I use the clamp I think the grip may fail although I doubt it... I appreciate your help greetings
[/RIGHT]Leave a comment:
-
Thank you very much for your help...I just confirmed it......Leave a comment:
-
Windbond 1853 25q64fwsiq thanks...Leave a comment:
-
I am very new to this I have 330s 15arr 81fb I bought ch341a ...with clamp ...I want to know if I need 1.8v adapter to flash BIOS winbond 1853 25Q64XXX or can I try without the Adapter thanks for the help and sorry for my bad EnglishLeave a comment:
-
thansk for your help
[url]https://articulo.mercadolibre.com.co/MCO-1291345045-kit-programador-memorias-bios-eeprom-ch341a-mas-pinzas-_JM#polycard_client=search-nordic&position=4&search_layout=stack&type=item&tracking_id=3b5a91ec-19f2-4841-8617-afdfe8b6d3aa[/url]
that function to me case _?https://thansk for your help <br /> ...e8b6d3aa[/url]Leave a comment:
-
Hello, I have an Ideapad 330S-15ARR (model: 81FB and factory ID: JVHFC1) it does not give video fans on... I try bios update usb but after fn + r for 5 minutes the charging light turns on and off but it does not give no beep , it does not load...... .bin file, how can I access it so that it can load, please help, thank you...Leave a comment:
No activity results to display
Leave a comment: