Re: Panasonic TNPA5335 from 50VT30/50GT30 sos6
I will put it back in tomorrow and try it again but im fairly sure it didnt light up at all
Lets call it a night and get some sleep, appreciate all your help Thank you
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Panasonic TNPA5335 from 50VT30/50GT30 sos6
ok, i have a working set of buffers i have 2 of these TV's one has good buffers one doesnt
I am negotiating with the seller to get a set of buffers
Back to the testing>
I get both board to light the LED up
bad board across led 1.812 and good one 1.814
C561 bad board .946 and good board .921
Leave a comment:
-
Re: Panasonic TNPA5335 from 50VT30/50GT30 sos6
ok ,sorry it was mega ohms
I just checked sc2 on the working board 11.65 m ohms and rising
C561 on both boards 0 ohms
TP82 to ground 17.05 K ohm on good one
TP82 1708 K ohms on bead board
The dead board has 7 flashes connected and 6 flashed isolated and jumpedLast edited by nick1969; 04-10-2014, 06:36 AM.
Leave a comment:
-
Re: Panasonic TNPA5335 from 50VT30/50GT30 sos6
I got it from USA, problem is i got a full set of boards for $220 delivered and to send them back its going to cost $80 and i will lose the $40 it cost to send them here because the seller doesnt get the shipping cost with the new global shipping program ebay has
No, no green led at all
Leave a comment:
-
Panasonic TNPA5335 from 50VT30/50GT30 sos6
Hi again,
Anyone had any luck repairing TNPA5335 SC board with sos6 ,no shorts that i have found any help appreciated
-
Re: LG 42PJ350-UB Sound, No Pic
Hi
with the buffer ribbon cable unplugged VSC is 2.5v and Vy 1.9v
Leave a comment:
-
Re: LG 42PJ350-UB Sound, No Pic
Vs = 204.6V
Va = 60.6V
Vsc = 23.5V
Vy = 22.9V
im guessing its Y sus board since VSC and Vy voltages are too low
Leave a comment:
-
Re: LG 42PJ350-UB Sound, No Pic
Thanks, i will open it up soon and check those voltages first, can you mark on the control board what 2 i need to jump please...
Leave a comment:
-
Re: LG 42PJ350-UB Sound, No Pic
Hi
I have the same model TV with sound only no picture, can you help determine if its the control board or Y SUS board please
Thanks
Leave a comment:
-
Re: Samsung PS42A410 has sound but no picture
Thanks so much guys
Ok I checked the buffer And there doesn't seem to be any shorts
I did find something strange the VSCAN solder tab where I tried to measure the voltage from that was showing 0 volts goes to ground
Here's a picture from the solder tab labeled VSCAN on the Y board...
Leave a comment:
No activity results to display
Show More
Leave a comment: