Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Yes trying to receive air channels but it wont let me get to the scan function as i mentioned in previous replies
-
I chatted with support and they said i cant bypass google account activation.
i did ask them if i can use the tv without google account and they had me try the same steps i ttied then thry said i have to take in for repair lol
i will create a google account for my friend and see if that works
Leave a comment:
-
Thanks but i tried that but it says i need to select the built in tuner but when i do that it says lineup not available and when i click next it it says "unfortunately videoinput setup has stopped"
Leave a comment:
-
LG 50ga7400 programming
Is there a way to bypass the google account when setting up this tv?
I tried the settings option with a regular antenna but it says need to select built in tuner.
when i select the built in tuner it doesnt detect anything
My friend doesnt have a google account or internet service he only wants to use this to watch regualr air channels...1 Photo
-
Insignia Ns-l22x-10a no picture only sound
When i power on the tv a "please wait" image appears then goes away then nothing after that only sound
When i was removing the back cover i heard a rattle.
Removed the metal plate and the heat sink was off (see pic)
would this cause a no picture/image issue?
What is used to put back the heat sink
[ATTACH=JSON]{"data-align":"none","data-size":"small","data-attachmentid":3319523}[/ATTACH] [ATTACH=JSON]{"data-align":"none","data-size":"medium","data-attachmentid":3319525}[/ATTACH]...2 Photos
-
Visio VP322 vertical black bar
Its been a long time since i been on here.
Anyway i searched the model number but no threads on this issue
I pulled this unit out of my companys electronics recycling bin
Wouldnt turn on so after opening it up discovered 2 bad caps
Replaced the 2 caps harvested from a different psu which where the same brand and rating .
I only did this to determine if the unit would power up which it did.
it has a vertical black bar and I dont recall if the issue is due to a bad tab bond or a faulty chip.
Is this repairable or should...
-
Insignia NS-40D510NA15 no picture only sound
Turned on tv one day and only sound worked
Checked for obvious blown caps and none found
I have my dvom ready. What should i check?
I only see 3 boards on this set...
-
DVOM dmsc683 turns on and off when i shake or bump it
i have a bluepoint digital volt meter that does not turn on unless i hit it or shake it.
If i shake itnor place it down hard it will shut off
I opened it and noticed a component has some odd wear on it
I tried looking it up on digikey but it doesnt show up
Can someone help me identify the component?
Hopefully this will fix the issue...
-
Philips 32PFL3506/F7 no sound, no channels found
No sound but i do have picture
I connected my laptop and a dvd player but no sound from the tv
Also i checked the specs on this model and it has a digital tuner
[url]https://www.cnet.com/products/philips-32pfl3506-f7/specs/[/url]
So i connected an antenna and did an auto channel program and it will not pick up any channels
I checked the boards for any physical damage and none at all
Should i just change the main board or what can i test?
Will this board work for my model because i cant...
-
Re: Proscan PLDED3992A-C led failure?
i was able to get it off.
i had to raise the temp and lower the fan speed. i did burn it a little more but not bad
thanks
Leave a comment:
-
Re: Proscan PLDED3992A-C led failure?
i tried using the heat gun and it didnt work
i was afraid of using to high of a temp and possibly damaging the strip
but i will try again
thanks for the help
Leave a comment:
-
Re: Proscan PLDED3992A-C led failure?
At what temperature and air speed do you use the hot air gun on the rework station?
Leave a comment:
-
Re: Proscan PLDED3992A-C led failure?
I cant find replacement strips so i will replace the individual faulty leds.
I removed the diffusers and tested each led
I think i found the faulty led on the end.
Plus the burn mark on the back of the strip is probably a good indicator lol...
Leave a comment:
-
Re: Proscan PLDED3992A-C led failure?
how????
i disconnected the top LED strip and probed it with tester and the strip does not light up
i did the same with the other strips and they do light up
do i have to de-solder the LEDs?...
Leave a comment:
-
Re: Proscan PLDED3992A-C led failure?
so i got the LED tester and tested all 3 strips
the bottom 2 strips light up
the top strip does not
Leave a comment:
No activity results to display
Show More
Leave a comment: