Re: Olevia 265FHD problems!

Thanks HAHOMETP.
On my board both D1 and D2 are both Red.
I measured the voltage at TP9: off = -000.0v and on = +000.1v go figure.

Also on my board D204 is a very dim green and LED D203 right next to it is bright red. so much so that you don't see the green on D204 unless your really looking. I do have the 4.2v on the brown wire at J60. I am sure that the Red LED D203 indicates a failure. Since it is right next to the D2AUDIO chip. and that I am having audio problems I'm 99 percent sure it is the D2 Audio chip/circuitry that...

Re: Olevia 265FHD problems!

Thanks HAHOMETP.
On my board both D1 and D2 are both Red.
I measured the voltage at TP9: off = -000.0v and on = +000.1v go figure.

Also on my board D204 is a very dim green and LED D203 right next to it is bright red. so much so that you don't see the green on D204 unless your really looking. I do have the 4.2v on the brown wire at J60. I am sure that the Red LED D203 indicates a failure. Since it is right next to the D2AUDIO chip, and I am having audio problems. I'm 99 percent sure it is the D2 Audio chip/circuitry that...

Re: Olevia 265FHD problems!

messured White, Blue and Yellow wires on CN2. while tv was on and running. got no reading on White, Blue and Yellow wires. Messured orange wire and got 11.88 volts DC.

Re: Olevia 265FHD problems!

Akk944 I want to thank you for you pictures. Specially of the Main Board LED's. I have a 265fhd-t11 that the the audio has gone out on. It only get clicking noise from internal speaker. and if I connect external speakers I get the same clicking noise. I have the exact same lights as in your picture except I have a red LED next to the D2Audio chip. I"v been looking for a main board with no luck. I think I have found a D2audio chip and will have a friend of mine that dose board repair replace it for me. crossing fingers and hoping that works. This...