Re: Iyyama Prolite E2475 - 2 seconds to black?
Yes the monitor was cold just hooked it up. (screen 1)
Not specificly with the brightness test, still have to do that on screen2, but no i dont see a dark picture with a lamp.
Ok will try that....
Nwijz
New Member
Last Activity: 12-10-2013, 03:31 PM
Joined: 12-08-2013
Location: south holland
-
Re: Iyyama Prolite E2475 - 2 seconds to black?
Hmm im beginning to notice differences between the 2 screens.
I put down the brightness on 1 of the screens and when i finished i accendently pressed the power button, but it wont turn on anymore, no led what so ever even when i remove the power cable and put it back in. When i reboot the pc the monitor isnt shown in the windows settings. (this is the one i took pictures from)
The other monitor just turns black after a while but the power led stays on, when i press the power button the led switches off...Leave a comment:
-
Re: Iyyama Prolite E2475 - 2 seconds to black?
It's a LED screen so i dont think it has an inverter, there are only 2 pcb's in the display, i added a picture of the second pcb....Leave a comment:
-
Re: Iyyama Prolite E2475 - 2 seconds to black?
Here are some pictures....Leave a comment:
-
Re: Iyyama Prolite E2475 - 2 seconds to black?
Yes i seem to read that article too, but the main inputs solder seem to be ok, i will post some pics tomorow.
Hey there congrats
, thanks for the advice, i'm gonna try and measure some caps on work tomorow, i pulled out the power supply. Then during this week i will try and do some measurements....
Leave a comment:
-
Re: Iyyama Prolite E2475 - 2 seconds to black?
Cannot answer if it developed over time, i got them like this recently.
They are not both connected to the same pc at the same time, further more if i connect them to another pc they respond the same so also yes i have tried them seperately.
I'm gonna try using a vga cable and mayb HDMI too, and also turn down the brightness.
What i forgot to mention, they did seem to stay on longer when they are flat on their back, but have to test that further.Leave a comment:
-
Iyyama Prolite E2475 - 2 seconds to black?
I got a problem with my Iyyama Prolite monitors, I have 2 monitors wich actually have the same issue but im unable to determine if it belongs to the 2 seconds to black category.
When i power up my pc they work about 15-20 minutes then go black with no led indication what so ever, i am then unable to turn them on with the power button for X hours. (next day they work again) My pc sais it is still connected, i connected them with DVI.
I also opened them up but saw no bad caps in my opinion, anyone got some further information on this? much appreciated.
...Last edited by Nwijz; 12-09-2013, 10:58 AM. -
Re: New Members - please post your introductions here
Hello all, I am from Holland, maintenance technician in the high voltage area, 10KV and up, bridge technician before high voltage. Have PC's as hobby's but not that femiliar with elektronics, know how to solder etc, hope u guys can help and might have a little input myself.Leave a comment:
No activity results to display
Leave a comment: